Search results

  1. flyingscott

    Getting ready to work on the 140

    I use one I have a 70 hp on it right now. Here is what you need to know. With My 70 hp I can trim it up all the way and it is pretty stable if I take the lower unit off it will tip over. A V4 will be more top heavy so what I do is I will put a hoist on the powerhead to hold it up if I need to...
  2. flyingscott

    Oil leak around propeller hub

    This is what my lower unit looks like on my 2 hp after winterizing oil in the exhaust is normal my lower unit is tight. I would be more worried if there was no oil in your exhaust. All my motors look like this if I go out there right now most of my motors will have drops of oil under them.
  3. flyingscott

    Starting battery 2 motors problem

    Hello I need to a switch that can isolate my 2 motors from each other. The problem I am having is with both motors connected to the starting battery I am blowing the regulator on the main engine. My main engine is a 1986 Evinrude 70 hp my kicker is a 1977 15 hp Johnson anybody have any ideas...
  4. flyingscott

    1982 3.6 hp mercury

    Is this a good motor. I am looking at one has compression and spark but doesn't run. If I buy it what problems should I look for .
  5. flyingscott

    gmc canyon /chevy colorado towing question

    I am looking at buying a 2005/6 canyon/colorado. The truck has the I5 3.5 litre crew cab. What I want to know is are these a good tow vehicle would prefer to here from people who own and tow with them thanks.
  6. flyingscott

    Tohatsu m90a crank question

    Hello I need to know if i can replace the main bearings on the crank of my tohatsu m90a if so are they available.
  7. flyingscott

    1986 evinrude 70 hp piston

    What would be the best piston for my rebuild
  8. flyingscott

    1986 evinrude 70 hp outboard motor

    Hello my 70 hp evinrude will idle and troll really well for about 10 to 15 minutes then slows down and dies. I then have to push the high idle lever all the way forward and prime it to get it running again. good compression and spark linc and sync has been done. Any ideas
  9. flyingscott

    1986 evinrude 70 hp idle question

    hello my 70 hp evinrude on the muffs idles around 1700 rpm in the water idles at 1100 rpm and 850-900 in gear is this a problem or normal otherwise it runs great. On my 16 ft starcraft I can turn a stainless 17" pitch prop right to 6100rpm and a 19" pitch to 5900 I know the 19" pitch is the...
  10. flyingscott

    2000 9.9 4 stroke nissan siezed

    Hello I just received a 2000 9.9 4 strk nissan and the motor is seized. I was wondering if it was worth rebuilding I have not torn into it yet so i do not know the extant of the damage. What I was told was he was cruising along on his main motor and the kicker dropped into the water and was in...
  11. flyingscott

    1985 70 hp evinrude propshaft removal

    Hello I was wondering if there is a trick to getting the prop shaft out of a 1985 70 hp lower unit as mine is stuck in there I am down to the pinion gear which wont come out it gets wedged between the shift dog and the case I was told push down on the shift lever and pull on the propshaft and it...
View older results
Top