Search results

  1. Lou C

    A few questions from a learner

    SEM sells paint that can be used to rejuvenate vinyl seats you might check out their website. That alu prop I’d probable replace but get that one fixed & keep for a spare. I’m more concerned about the fuel tank than anything else. I can’t imagine that the boat was built that way, it looks like...
  2. Lou C

    New DP-M outdrive install: need advice

    OK Bruce so it doesn't work on the Volvo, I got it....
  3. Lou C

    New DP-M outdrive install: need advice

    that jack is the same one I have, it works great and when I bought it they were around $175 or so. the screwdriver in the u joints trick works just fine. as far as the 'stupid' water pump, yeah that's the one where you can change the whole thing for $45 in 15 min, not like an Alpha where you...
  4. Lou C

    New DP-M outdrive install: need advice

    Agreed if you are going to own the boat a long time the tools will pay for themselves in one season basically, and your boat will be better maintained than otherwise. I've been doing this in salt water with a moored boat 6 months out of the year which is probably the hardest use of an I/O power...
  5. Lou C

    Towing and Launching

    Definitely put brakes on the trailer, the Outback has good brakes but even a light trailer can push you through a red light.
  6. Lou C

    New DP-M outdrive install: need advice

    Sounds like that might be it, that you bought it from a different dealer, but it’s really not a hard thing for any marine mechanic. When reinstalling you want to check alignment as mentioned and make sure the driveshaft bellows is in good shape. There are a few tricks to make it easier such as...
  7. Lou C

    4.3 volvo penta flywheel problems

    I'm wondering if could it be that the studs were not tight in the threads in the flywheel even though the nuts were tight to the coupler. Might have to double nut the studs to get them tight enough. OMC used this exact same way of attaching the flywheel to the crankshaft and the coupler to the...
  8. Lou C

    4.3 volvo penta flywheel problems

    What about the difference between automatic transmission flywheels and manual transmission flywheels? Did you use the flywheel from the original marine engine or the truck? I think with the VP style coupler the same bolts that hold the coupler on hold the flywheel on, unlike some Mercs.
  9. Lou C

    How to Switch to Antifreeze Cooled Engine

    The 4175 is a spread bore carb, the 4160 a square bore. Right now I think the Edelbrock 1409 is still on back order. Keep checking to see when it will be available, some of the Holley carbs are available, some you have to order & wait. PS looks like you can order the 1409 now...
  10. Lou C

    How to Switch to Antifreeze Cooled Engine

    Well your only options for a spread bore (which is the pattern for the original GM cast iron intakes) is a Quadrajet which has not been made in many years and good ones are very hard to find (but is an excellent carb) and the Holley 4175 which was intended as a Quadrajet replacement). Everything...
  11. Lou C

    How to Switch to Antifreeze Cooled Engine

    The bottom line is that boats that size if still running a small block should have a 383 stroker; the extra displacement makes a big difference. MPI on a boat like this where you are adding it on is a lot of extra cost and complexity for very little gain. It’s not the same thing as if you bought...
  12. Lou C

    How to Switch to Antifreeze Cooled Engine

    There is just no need for EFI on an old boat just use a good 4 bbl carb properly jetted for that application and it’s going to give you the most you can get from a big boat with a small engine. EFI conversion is just not cost effective on an old boat. Don’t make your life more complex than it...
  13. Lou C

    How to Switch to Antifreeze Cooled Engine

    My big “lake” is Long Island Sound…it’s only about 12 miles across to southern Connecticut…
  14. Lou C

    How to Switch to Antifreeze Cooled Engine

    I have it propped to hit 5,000 rpm wide open (15.5x15 prop) so I’m only getting approx 35-40 mph wide open but due to typical choppy conditions in the local bays where I boat low speed responsiveness and acceleration on plane is more important to me than wide open top speed. IMHO this boat...
  15. Lou C

    How to Switch to Antifreeze Cooled Engine

    You’re got a little Chevy small block that used to come in a 4,000 lb Chevy Impala/Caprice full size car of the 70s/80s/90s in a large boat so your fuel economy is not going to be great no matter what. I would also recommend a 4 bbl carb on that engine because you will have better low end...
  16. Lou C

    Four Winns SL262 - 2008 Bimini repair help

    Taylor Made may sell those poles as well
  17. Lou C

    1994 Volvo Penta 5.7 GL Timing Setting Procedure

    Then just time it at idle rpm
  18. Lou C

    1994 Volvo Penta 5.7 GL Timing Setting Procedure

    These are 2 different systems; the BID uses an electronic module but a conventional centrifugal advance set up like that used with points vs the Delco EST which also uses electronic spark advance. The Delco requires the special procedure whereas I do not think the Prestolite BID does because of...
  19. Lou C

    TCW3 Oil and Non Outboard Applications

    The only applications that I know of where TCW3 is recommended for an air cooled 2 stroke is in Toro snow blowers and Lawn Boy lawnmowers. For everything else use the 2 stroke oil for air cooled 2 strokes. Reason why is that the air cooled 2 stroke oil has the low ash formula vs TCW3 which is...
  20. Lou C

    How to Switch to Antifreeze Cooled Engine

    while good boats are hard to find due to market etc, you'd be a LOT better off, waiting till you can water test any boat you might want to buy. What you're doing is risky, even if the boat is very low priced.
Top