Search results

  1. Scott Danforth

    G3 1610 prep charges?

    first, welcome aboard next, you can negotiate the price on the package. there are manufacturer incentives to sell old inventory, since the 2024's are coming out, the 2022 is almost 2 years old. and yes, many boats under 25 feet are dealer rigged because they are manufactured like they come...
  2. Scott Danforth

    VP DP-SM drain screw leaking

    that o-ring is too small for the groove that looks like a 1.25 mm diameter o-ring jump up to a larger cross-section
  3. Scott Danforth

    I am looking for a real manual on my boat by hin number.

    first, welcome aboard second, what information are you looking for? if you have a new(er) bayliner. you can get the generic manuals. https://www.bayliner.com/us/en/owners-corner.html if you want, you can get a factory service manual for your motor/drive from the manufacturer of the...
  4. Scott Danforth

    Boat listing to left

    being a 1988, I guarantee there is wet foam in it on the port side unless you just did a restoration. there probably is also a hook did you drill-test the stringers on the port-side of the bilge?
  5. Scott Danforth

    Neutra-Salt: Connect to power steering cooler?

    Thanks for coming back to this and updating it.
  6. Scott Danforth

    1990 5.7L L.E. OMC Cobra - Various Questions

    Merged the threads here. Only one thread per topic
  7. Scott Danforth

    Old aero craft

    See this in post #2 I have found that many times you need to go in, in-person and talk to them
  8. Scott Danforth

    1969 Boston Whaler hull peel

    The 08 is CSM stitched. I would use poly over epoxy because epoxy isn't worth the extra cost.
  9. Scott Danforth

    Boat listing to left

    Look for something heavy on the port side
  10. Scott Danforth

    1969 Boston Whaler hull peel

    There should not be a black layer. Just gel and fiberglass over foam. Black usually indicates some sore of bacterial or mold issue CSM can not be used with epoxy, neither can 1708. CSM requires the styrene to break down the binders Using epoxy requires cloth and 1700 And you can not gel...
  11. Scott Danforth

    Old aero craft

    Get the prior owner, drive him down to your local registration office with you. Get the title transferred to your name
  12. Scott Danforth

    Old aero craft

    do you have paperwork with your boat from the prior owner? registration, etc.? if not, you may have an up-hill battle. see your local registration office. they will most likely issue a new serial number or HIN.
  13. Scott Danforth

    Cam profile choice - Volvo B20B

    yes, assuming that is a marine grind. your marine motor does not share the cam with the automotive motors.
  14. Scott Danforth

    1969 Boston Whaler hull peel

    how far did you have to grind. if you just ground thru the gel, then a coat of 1.5 oz CSM would be fine prior to sanding and re-gel or paint. if you ground a few layers deep, build back up with 1708
  15. Scott Danforth

    1998 Chaparral 2330 Sport SE

    first, welcome aboard. second, if you dont find a fiberglassed deck on any fiberglass boat, someone else was in there and did a deck-over. they leave the factory with fiberglass covering the core material. Chap has been doing fiberlass decks for about 50 years.
  16. Scott Danforth

    1969 Boston Whaler hull peel

    your 55 year old whaler made it 40 years past when it was designed to last. if you have any moisture in the foam core I would scrap it. you cant dry them out. if you grind fiberglass, you must replace the fiberglass. pic #2 says you are almost thru to the foam.
  17. Scott Danforth

    Cam profile choice - Volvo B20B

    because you are running a wet exhaust and the other cams are street cams with too much reversion.
  18. Scott Danforth

    1990 5.7L L.E. OMC Cobra - Various Questions

    holley 4175 is a spreadbore. Square bore holley 4160 is what is shown (all but a few the big block VP's got a 4150 or 4160). look at the air horn and read the numbers. then look at the holley bible. https://documents.holley.com/techlibrary_carb_numerical_listing.pdf
  19. Scott Danforth

    1990 5.7L L.E. OMC Cobra - Various Questions

    Most of the king cobra parts are NLA The Holley carb appears original. Volvo used a mix of Holley (higher performance motors) and Rochester (base engines) in the 80's then went only Holley starting in late 89
  20. Scott Danforth

    1990 5.7L L.E. OMC Cobra - Various Questions

    Most likely the Holley is stock. Both OMC and Volvo Penta ran Holley carbs
Top