Search results

  1. Lou C

    Old gas

    Is it straight gas or E-10? If straight gas I would think you probably won't have a problem. Is the tank full? I have used E-10 stabilized as much as 2 years old and not had a problem in the boat.
  2. Lou C

    2004 volvo penta 5.0 gl-e camshaft

    also pick up an appropriate sized thread chaser (take the old bolt to the store to match it up) to clean out the holes in the block, the get gunked up due to raw water cooling and then the head bolts might not thread all the way in affecting torque readings. You might even want to thread the...
  3. Lou C

    Why an increase in engine horsepower will hurt your ‘holeshot’, acceleration and midrange cruising.

    and one last point, vehicles have transmissions, boats don't which is related to this point of the importance of power curves.
  4. Lou C

    4.3 Mercruiser cold start issues

    But this is the USA, anyone can sue anyone. If this was still happening we’d have heard about it. In fact even though Merc stopped using them OMC and Volvo used them from when Quadrajet production ended in 1989 or so until the change over to TBI. That means they were used approx 10 more years...
  5. Lou C

    Riser To Manifold Torque w/Sierra gasket

    Do they look like these? These came with my Barr exhaust kit, they sealed well, installed about 3.5 years ago. you could try torqueing the bolts that hold the exhaust elbows on, (people call them risers but the are elbows, a riser is a spacer between the manifold and the elbow). Try 25 ft lbs...
  6. Lou C

    Glue vs clip VP SX exhaust bellows

    sometimes grease can separate and liquify and look like water, dip a napkin or a paper towel in it and see what it looks like. If it eventually evaporates it was water but if not it could have been liquefied separated grease
  7. Lou C

    4.3 Mercruiser cold start issues

    I think that's a thing of the past Chris, if that were still an issue in the USA, you KNOW that Holley would have a pack of lawyers after them. Probably 80% of classic muscle cars and hot rods here are running Holley carbs, or their derivatives like Quick Fuel et al. Yet you never really hear...
  8. Lou C

    4.3 Mercruiser cold start issues

    Interesting, I heard good things pretty much always about the Edelbrock carb but didn't really know this characteristic of it. Older Quadrajets had leaks from a welsh plug in the bottom of the bowl but I have not had that with mine. I also tried a Holley 4160 on mine for a while and that didn't...
  9. Lou C

    Pulling outdrive question????!!!

    The bellows on this design, is actually at the top of the tube where the shift cable comes out in the engine compartment, it doesn't need to be replaced, until you replace the shift cable. Totally different design than the Merc Alpha shift cable bellows.
  10. Lou C

    Pulling outdrive question????!!!

    That's what makes it! easy engine access.
  11. Lou C

    Momentary freezing inboard

    Definitely drain it. The risk of cracking something is just not worth it.
  12. Lou C

    4.3 Mercruiser cold start issues

    And that's the advantage of a mechanical fuel pump, the engine stalls, pump stops, if the pump diaphragm leaks, the gas goes into the yellow overflow hose. Too bad modern GM small blocks did away with mount for the mechanical pump. And the pump will not fail to run if there is a wiring issue...
  13. Lou C

    Pulling outdrive question????!!!

    Well if the flange on the gimble housing is in good shape with no corrosion you probably don't need it, but on older boats used in salt water it might be helpful. Bruce I see you sold the Volvo and went with Mercruiser, how do they compare? Cobalt is a beautiful boat. For me though no more...
  14. Lou C

    98 4.3L Vortec problem

    Yep could be a cracked block/heads or if it has the Merc V6 one piece manifolds, they can fail and put water in a cyl and in the oil. Was the boat stored in freezing temps? Winterized properly?
  15. Lou C

    Pulling outdrive question????!!!

    Yep they changed from the original style some years back so follow what they say.
  16. Lou C

    Pulling outdrive question????!!!

    well you will hear different stories on that. I know in my OMC manual (for the pure OMC model) they did say to use OMC Gasket sealer on the flange of the gimble housing. So that's what I did. But some have said that Volvo says no sealer necessary. I coat the part of the bearing carrier that...
  17. Lou C

    Pulling outdrive question????!!!

    joint venture is what you have other way you could tell is if the raw water impeller is mounted on the engine, if it is then its a joint venture drive. The pure OMC Cobras had the impeller in the tail end of the upper gear housing, both the dog clutch ones the rare cone clutch one. no gasket...
  18. Lou C

    Pulling outdrive question????!!!

    but pix are best!
  19. Lou C

    2004 volvo penta 5.0 gl-e camshaft

    that's a lot of pitting, did the engine sit with water in the oil at some point? I had 2 blown head gaskets, water in the oil (salt water) and was able to get the water out of it within a week changing oil 3-4 times. When I did the top end overhaul, I pulled out all the roller lifters to...
  20. Lou C

    Pulling outdrive question????!!!

    Yep just think of the joint venture drives (hump on top of upper gear housing, not flat like a pure OMC Cobra) as the same as a Volvo SX. The similarities are really just in the transom mount, the drives themselves are totally different.
Top