Search results

  1. Scott Danforth

    Exhaust elbow for Volvo Penta engine with catalytic converter

    Cat exhaust parts are OEM only
  2. Scott Danforth

    Exhaust elbow for Volvo Penta engine with catalytic converter

    You were told correctly
  3. Scott Danforth

    V8-320-c-b

    Unfortunately there is not with an EFI motor
  4. Scott Danforth

    Winterizing

    Drain plugs are located: on bottom of block, just above oil pan rail. Bottom or end of exhaust manifolds Every hose Once drained, it's winterized. If you want to add anti-freeze, use a funnel and add to the thermostat housing Make sure the anti-freeze is rated for -100 and for engines
  5. Scott Danforth

    Winterizing

    The main thing with winterizing is to completely drain all water from the system. Make sure to mechanically clear the drain ports with a stiff wire or a screwdriver
  6. Scott Danforth

    V8-320-c-b

    And what troubleshooting have you done? Carbed or EFI? If EFI, you need Rinda
  7. Scott Danforth

    First time winterizing 4.3 mercruiser, alpha one.

    That started in the 30s. Fort Myers and Punta Gorda are both built on swamp land
  8. Scott Danforth

    First time winterizing 4.3 mercruiser, alpha one.

    2000 people a day are moving to Florida
  9. Scott Danforth

    Winterizing

    OK, then check the shaft gland, service the strut bearings and rudder gland, change the raw water impeller if you haven't done it recently
  10. Scott Danforth

    Herters boats

    Try here http://www.fiberglassics.com/library/index.php?title=Herters
  11. Scott Danforth

    Herters boats

    Other than what you posted, no
  12. Scott Danforth

    Winterizing

    Change oil and filters. Drain the blocks, manifolds and hoses. Pull the drives and do the annual PMs Basically the info from the manual
  13. Scott Danforth

    omc v mercruiser

    OMC has been out of business since the 90s
  14. Scott Danforth

    Growling noise when steering.

    I suspect the fleabay u-joints are junk. Suggest spicer or GKN
  15. Scott Danforth

    Side of floor supports

    Any reason the floor wasn't rub all the way to the chines?
  16. Scott Danforth

    Jegs vortec heads

    Run inconel only if you are running a supercharger Not needed for your motor unless you like wasting money
  17. Scott Danforth

    Mercury 150 not performing well under load and drinking gas.

    You wait for the manual
  18. Scott Danforth

    Seaswirl 201 bowrider 1995

    OEM pumps are Carter/Airtex
  19. Scott Danforth

    Mercury 150 not performing well under load and drinking gas.

    You have to properly set timing before you worry about the prop.
  20. Scott Danforth

    Blown head gasket / overheat

    Sensor is on a switch that connects to ground
View older results
Top