Search results

  1. Franco_boater

    When is the time to reseal your drive?

    Hello, when changing my upper gears and shift shaft bushing My friend who owns a boat and we are boating together was wondering when it’s good time to reseal your drive ? Because my shift shaft bushing was worn and allowed for water intrusion that caused me yo change upper bearings. How to...
  2. Franco_boater

    Yoke seal

    @achris... can You tell me how to dissasemble the whole set? I need to change my bearings one is rusted.... can you mark on the picture please step by step from which side use the pry tool/separator to dissasemble it please, thanks Spacer number #21, is it important which side facing gear/unis...
  3. Franco_boater

    Yoke seal

    Si si, I mean outer. thanks for clarifying.... I will post updates...
  4. Franco_boater

    Yoke seal

    Is it right when tight? I think its too tight but I dont know, will try while rolling torque, shouldn't it spin with ease? for example my driven gear on the shaft spins very easily, without any ressistance but the Yoke gears and bearings are quite tight I dont know if its preload set too much...
  5. Franco_boater

    Yoke seal

    Is it right when tight? I think its too tight but I dont know, will try while rolling torque, shouldn't it spin with ease? for example my driven gear on the shaft spins very easily, without any ressistance but the Yoke gears and bearings are quite tight I dont know if its preload set too...
  6. Franco_boater

    Shift shaft bushing removal and install

    @achris my friend, last question to You... seal is with dual lip, but which side UP? Each side is slightly different\
  7. Franco_boater

    Yoke seal

    Thank You, how tight the bearings should be while spinning it in hand When removed from my Yoke it was quite tight...Take care
  8. Franco_boater

    Yoke seal

    Oh didn't know that... so 5.25lbinch is the limit and can be below that value or the final target torque value?
  9. Franco_boater

    Shift shaft bushing removal and install

    @achris I have a question to be 100% sure, I have installed my shift shaft bushing and seal facing UP (spring facing UP) towards U joint bellows, is that correct? so the exhaust side will be like this: And do You think I can use some socket to push/hammer the upper drive shaft seal? its 1...
  10. Franco_boater

    Yoke seal

    I am sorry... He posted this But I cant find this info in 14 manual... and my manual says only 5.25lb-in but above we have some range... why
  11. Franco_boater

    Yoke seal

    Can I reuse the nut from the gear set?
  12. Franco_boater

    Yoke seal

    Ok, before disassembly I will check rolling torque on existing set, then I will try to set a new one after smacking with plastic hammer. I found in some manual there is a range in torque but in my manual #14 it says only the limiting value which is 5.5 lb-in. (0.55 Nm) for used bearings], Also...
  13. Franco_boater

    Yoke seal

    Thank You all is now more clear for me, We have perfect seal, is that ok or should I buy blue silicone??
  14. Franco_boater

    Shift shaft bushing removal and install

    Southern part, Calabria! Do You have any tips when installing this seal ?
  15. Franco_boater

    Yoke seal

    Yes I have checked your video, its very good and resonable for me. 1. Question about light hit, how much hit is enough? How I can recognize the hit relased the pressure? I can try to find or rent this tool maybe? But hitting with copper hammer is easier but I am afraid how much hit is enough to...
  16. Franco_boater

    Shift shaft bushing removal and install

    Thank You, Come to Italy You have to try our pasta! Also Help with yoke seal will be appreciated in other thread
  17. Franco_boater

    Yoke seal

    Good morning, All what I need is to replace only the SEAL and Oring there... but found the info I need to split the bearing thats why I am so concerned.. Boat is in my marina so far I don't know what kind of gear set Ive got, do You have a picture how to recognise them ? Is the picutre above...
  18. Franco_boater

    Shift shaft bushing removal and install

    Thank You or maybe You have better idea for press that seal for DIY? Im studying manual 14 and Ive found step about removing the driven gear bearing cup and shim is that needed for oil seal replacement??
  19. Franco_boater

    Yoke seal

    Hello @achris i cannot edit my post, Ive found picture on the Internet, If I have assembly like this Gen2, where I have to put the bearing separator and how much separate ?? Can You mark it please for me... Thank You
  20. Franco_boater

    Shift shaft bushing removal and install

    Grazie mille! Please tell me, to replace the yoke oil seal and oring, do I have to really separate the bearings before setting rolling torque? I have torque dial wrench thats no problem but I am afraid of separating bearings.... I read method of punching with brass hammer what Don_S said but im...
Top