Search results

  1. brian3127

    Setting the timing

    Ok thanks guys
  2. brian3127

    Setting the timing

    That’s why I’m confused The engine is in the process of getting rebuilt and I want to make sure it’s set right. About $1000 in work at the machine shop plus parts. Me and my son are putting together. So I’m wondering
  3. brian3127

    Setting the timing

    No points there is an ignition module
  4. brian3127

    Setting the timing

    The engine I have does not have points. Do I still set it to 6* btdc
  5. brian3127

    Setting the timing

    I have a 1972-1977 mercruiser 3.0. Serial number 4920382 I have seen on YouTube that you have to put the engine in base mode to set the timing. My mercruiser service manual tells me to run the engine at idle and set it to 6 degrees btdc. What years did they change it
  6. brian3127

    what manual to buy.

    So it’s not original to the boat. Can you give me the website that you are using to give me info on my motor. Thanks
  7. brian3127

    what manual to buy.

    A quick question. I typed the serial number in a search. And nothing was found. My boat is a 1985 smoker craft. Is the engine a 1985 also. Just wondering if it is possible an original engine to the boat
  8. brian3127

    what manual to buy.

    Thank you very much
  9. brian3127

    what manual to buy.

    4920382
  10. brian3127

    what manual to buy.

    I am getting my Mercruiser 3.0 back from the machine shop today. Gettinga full rebuild. what is the best manual to buy for putting it back together.
  11. brian3127

    3.0 mercruiser valve adjustment

    are the lifters hydraulic they need to be pumped back up with oil. possibly
  12. brian3127

    Aluminum and fiber glass

    ok thanks
  13. brian3127

    Aluminum and fiber glass

    I have a smoker craft 19ft aluminum hull. wood floor. I took the carpet out and was going to paint the floor. The wood is not rotted but it’s not smooth. Could I go over the wood with fiber glass to smooth it out. Would the resin or fiber glass react with the aluminum. Thanks
  14. brian3127

    getting rig of the carpet.

    the paint option seems cheaper. thanks guys
  15. brian3127

    getting rig of the carpet.

    I have a 1985 smoker craft. the wood floor is still in good shape. the carpet is not. looking for suggestions on what to replace it with. we mainly salmon fish in lake Mi. so i would like to stay away from the carpet.
  16. brian3127

    1985 mercurial 3.0 130hp piston

    Thanks scott We are rebuilding it. So we are putting all new parts. Especially a new thermostat and water pump. Surprisingly the cylinder where that piston was is actually smooth.
  17. brian3127

    1985 mercurial 3.0 130hp piston

    Engine was knocking last time out. So me and my son pulled the engine out of the boat. Started to tear it down to day. We have owned this boat for 2 years This is piston #3 Question. what would cause this? Engine had plenty of oil. Oil pressure on the gauge was above 40lbs. water temp was...
  18. brian3127

    mercruiser base timing

    I have a 1989 smokercraft with a mercruiser 3.0 engine. I had to buy a plug that goes into the ignition module so I can put the engine on base mode. When I start the engine and then plug it in and connect to 12v the engine rpm does not drop at all so what does this mean. I thought I read...
  19. brian3127

    set timing

    I have a 1989 19ft smoker craft with a mercruiser 3.0. I have watched videos on how to set the timing on the engine. But they don't say what year there motor is. When I look at the distributer cap there isn't a second plug in it with the 2 white and black wires. There is just one plug on the...
  20. brian3127

    Setting idle rpms

    Do you set the idle in neutral or in gear. and is recommend rpm at idle 700
View older results
Top