Search results

  1. dwco5051

    Lot more new boaters and large wakes?

    I have yet to see a jet ski with a 1600 Watt Stereo yet so there is a good side to them.
  2. dwco5051

    Need options for making the ground flat enough to roll the trailer. Drive way pad.

    This is the first thing I thought of as I have a couple if these I got used many years ago. Then I saw what they cost today!!! May be cheaper to pour concrete. I have seen people pave with concrete blocks on edge, fill with dirt and plant grass. Labor intensive to excavate and lay a good...
  3. dwco5051

    20 seconds to start peeing on muffs

    I have never timed any of my motors but none ever had a tell tail stream the moment they start. To fill a drained block and start spitting will take some time. Don't know if 20 seconds for your motor is normal or not.
  4. dwco5051

    Random

    6 pumps on the grease gun every time I tow the boat and I know I will never have a bearing go out.
  5. dwco5051

    best way to tow with a lund baron I/O?

    Like the others said go with a bridle and float. A pylon mounted over the turning center of the boat is good for competition slalom skiers cutting hard and otherwise pulling the stern to one side or the other. Helps the driver keep in a straight line on a marked course but not necessary for...
  6. dwco5051

    Drain plug question

    Glad to hear you got it out. Now you have two things to worry about. #1 As I said in an early post it is a good idea to keep a spare in the boat. #2 This is the big one. Remember to put it back in before launching the boat. It is preordained that every boater will some day launch without...
  7. dwco5051

    Unknown reservoir

    Master Cylinder for surge brakes???? I take it this is on the trailer tongue close to the coupler.
  8. dwco5051

    Old Glastron identification

    Need a little more information. Measure the overall length of the boat and let us know what it is. That appears to be some thing in the CV series. Depending on the length that hull may of been originally been I/O powered and the transom converted at sometime for an outboard. The metal on the...
  9. dwco5051

    Old Glastron identification

    Not to rain on you friend's parade but unless he has all the paperwork in order he may never be able to get that boat registered for use. #2; Just to make it seaworthy will cost more than the boat will ever be worth. #3; That trailer is way to small for that boat and will have get another...
  10. dwco5051

    Drain plug question

    If it will come out just #1. As Scott said if the plug doesn't come out with out a lot of force replace the whole thing (1 & 2)
  11. dwco5051

    Drain plug question

    I can't tell from you picture if that is a 3/4" or 1/2" plug but if you get it out ok consider getting two nylon plugs as replacement. Why two? Keep one in the glove compartment of the boat because sooner or later someday you will go to launch and remember you left plug #1 on the workbench at...
  12. dwco5051

    Drain plug question

    Been there, common problem. That plug is a tapered pipe thread and once the initial corrosion bond is broken it will unscrew easily. The tapered thread is designed to be leak proof so it is hard to get any solvent into the threads. Try putting pressure on it with a wrench and tapping the...
  13. dwco5051

    What's the difference between QL77JC4 and the QL82C

    Or 1950 when every angler kept a least one spare set of plugs in their tackle box. One quart of Gulf motor oil to 5 gallons of gas was the mix for my motors for years. Never owned a 50:1 motor until I bought a new Mercury 850 in 1977. In 20 some years only changed the plugs (surface gap)...
  14. dwco5051

    Trolling motor not move boat fast enough in my opinion.

    It sounds like you are not getting 24v and only running on 12. You should almost be able to ski behind a 17' bass boat with 82# thrust. Is there a rocker switch beside the plug on the panel marked 12/24? My older 20' Nitro had one and it was for a charger plug that would plug an adapter...
  15. dwco5051

    Elgin 5HP motor

    Don't know what year that motor is but if it is one of the air cooled Eska built models the water pump only pumps water up into the lower leg to cool the upper seal. Does your motor have holes on the sides of the leg like the one in the picture? If so that is what the arrows are pointing to...
  16. dwco5051

    Rec gas prices???

    Here in Pennsylvania they use a formula to figure how much gas was bought by boaters. That amount is transferred from the DOT general fund to the Fish & Boat Commission boat fund. The monies are used for boating safety education, aids to navigation, boat law enforcement, access and launch...
  17. dwco5051

    Looking for Tracker Targa Transom Corner Cap

    Local weld shop could fabricate that. Since you have the one side it would be simple to make a pattern for the port side. Probably 5083 or 5383 plate. Any shop with marine experience could fix you up.
  18. dwco5051

    Nada Guide

    True value is what one willing buyer will pay to one willing seller for an item. Book value is based on collected data of the average selling price of an item. I suspect that NADA values or based on a small percentage of the actual number of sales on that item. Statistic calculations accuracy...
  19. dwco5051

    Fuel Consumption - Is This Right?

    My mistake: Change mpg to fuel burn rate . My brain got ahead of my fingers when typing this . Thanks Scott, missed that when I first proof read it. Another senior moment.
  20. dwco5051

    Fuel Consumption - Is This Right?

    There is an old rule of thumb that mpg at full throttle is equal to 10% of motor horsepower. In you case 6 mpg. Those older OMC's were known as fuel hogs so depending on many things including loading, prop, engine age and on and on you are probably in the ballpark at 4. What is the max HP you...
Top