Search results

  1. alldodge

    Farm Tractor

    I'm looking for a farm tractor and will probably get a kubota, but will look at others. Thinking of a 60 sum tractor and doesn't need a loader but it would be a plus. Was going to buy new with cab and at least 70HP, but the cab part came from the wife. Been using a friends open ROPS for the...
  2. alldodge

    Boat buy true story

    Buying boat without test ride Guy I know sells his small cruiser and buys the new boat below without a test drive. Boat is put on muffs and it fires up, all looks good. Takes it took the water and has a fun day but notice the bilge pump keeps turning on. Once back home at a shop they tell...
  3. alldodge

    Finally Its Pay Back Time - Yellow Jackets

    About 12 or so years ago, I'm in French Lick IN following my nephew on an old Korean war Army Mule across where natural gas pipe line crosses the country. The Mule is not fast, top speed maybe 20 mph. My nephew is riding some 4 wheeler but not going fast. He goes over a bump in the field and...
  4. alldodge

    Says Its a rivet gun

    Bought this at an auction for $27 so figured it was cheap enough. Says its a rivet gun and appears to maybe take 1/4 type, but cannot find any info on it. Anyone ever see one similar?
  5. alldodge

    Need hard plastic glue

    Couple years ago I replaced my trim switches and then glued a new cover (item 5) on using PVC medium strength glue, or at least that is how I remember it. The switches never fit just right so today I used a heat gun and pocket knife and took the cover off. Pulled switches and space (item 8)...
  6. alldodge

    Civil Forfeiture Struck down by Court

    Been donating money to IJ since I heard about it, its just not right. Looks like with the district judge in NM that many of the other states will start to fall apart now also. This is a win for the constitution...
  7. alldodge

    2007 4 Tec and NGK plug changes

    Got my new plugs from iboats today and the top of the plugs are different. Not sure if this is going to be an issue or not NGK DCPR8E On a side note iboats might save some shipping cost using a smaller box
  8. alldodge

    Follow request accept Error

    Received a follow request and when I selected "accept" I got this message
  9. alldodge

    4 Tec Misfiring

    My 07 Seadoo started loosing power and the longer it was run the worst it got. Slowly managed to get it back to the dock and looked at the plugs which looked OK. Checked voltage, and looked but didn't find the fuel pressure test point. The filter is in the tank as part of the pump After...
  10. alldodge

    Bose Soundtouch 20

    The Admiral has been walking and doing all the healthy stuff her insurance provider has asked so they offered her a prize. She chose the Bose Soundtouch but thought it was a radio, its not. This thing works off of streaming and the network. We don't have any of the hey whatever play...
  11. alldodge

    Sitting for 5+ years and fires right up

    A 2002 Crownline 6.2 MPI with 152 hours. Boat has been at the same slip for at least 10 years. Been sitting most the time and several years ago it was looking pretty bad, covered with years of tree pollen and crud. Saw the owner on it cleaning it up, and then he left. For the next 5 or more...
  12. alldodge

    What type of fitting

    Below is a fitting on a 9000 psi pressure gauge and I need to know what kind/type it is. Trying to find an adapter to go from the gauge to an npt fitting
  13. alldodge

    Laptop with Win 7 Pro

    Wife's desktop HD crashed and now I'm looking for a laptop with docking station to replace it. I want to stick with Win 7 so all of her old software can be installed. Stated looking at Dell XPS 9360 and Levono and others, but then thought about the Win 10 issue. Computers keep changing and...
  14. alldodge

    New WiFi Router

    One of my routers went belly up, it was a Linksys E2500. Need to get another and wonder if anyone has recommendations. Don't do gaming, and top bandwidth is 5MB in this part of the country. The last one worked well until I think the last power on/off.
  15. alldodge

    Dissimilar Metal Question

    Had to replace the fuel tank on my dump truck and went to Aluminum instead of steel. Tank comes in and looks good, but has brass fittings in the top. Dissimilar metals tells me that brass and aluminum is not a great thing. Its not terriable but not real good. The brass fittings are for plugs...
  16. alldodge

    Hydraulic Test Kit

    My D3 dozer has some steering issues and need to find a hydraulic test kit which will work. I have two fittings which are STOR Boss fittings (7/16-20 and 9/16-18). Some of the kits found are 9000 psi others 8K psi. Currently have gauges for 400 and 2000 and the D3 does not use that high of...
  17. alldodge

    Retune time MEFI Burn, AFR

    A few years ago, my 502 MPI, MEFI-1, VST, 415HP and went to a 509 MPI, MEFI-3, cool fuel, 530HP. Since then I've increased oil supply lines, oil cooler, installed oil temp and water pressure gauges. Motor oil pressure has increased along with flow (AN-6 to AN-10 lines), yet the oil temp has...
  18. alldodge

    Video software

    Looking for some video SW that has a bit more then windows movie maker. Just barely used movie maker but not able to figure out how to put things like words, arrows and such. I'm planning on making some vids of my helm when doing some runs for collection of data.
  19. alldodge

    Chrysler 105 and 125 combo Maybe

    Back in 2015 I picked up a Chrysler 105 Conqueror with a 105 hp OB. Well the OB had a cracked block so could not use it. Frank mentioned before his passing that I should look for a pre 1994 Force 120 hp and swap the cowling. In looking I found what I thought was a 140, but might just be a...
  20. alldodge

    Alignment made so easy, Should have tried sooner

    Short answer but long story, but if Ya don't want to read it go to the bottom I bought the Merc part 91-863372 a couple years ago and never used it. I managed to get it real close without it so (thinking to my very Naive self) , said self "your good, no need to get the tool" and moved on. The...
Top