Search results

  1. SHSU

    1979 Starcraft 16’ SS Refresh

    Really like that fuel tank build, any pictures showing support below? Looks like you got plenty of room for the piping. That would have been a lot cheaper if I could have done a permanent front deck and used a similar method design.... But happy Admiral is a happy ship!!! SHSU
  2. SHSU

    Shoestring Starcraft SS160 Resto-mod - let the long slow road begin

    Mine came with a ski locker in the center. I took it out and opted for a under floor fuel tank. The stringers are what you have to work between. According to my fuel tank planes, I accounted for 17.55 inches in width to sit between the stringers. SHSU
  3. SHSU

    1979 Starcraft 16’ SS Refresh

    Move along!! How are you going to secure the flooring? Counter sunk rivets covered with epoxy or just leaving them exposed? SHSU
  4. SHSU

    22' Islander rebuild

    Apologies if you thought I was out of line. Completely agree that a rusted or ill repaired trailer would not be something I would want to get under even without water in the hull. The argument has been made that it can also damage the hull. Either way, the information has been posted and...
  5. SHSU

    1979 Starcraft 16’ SS Refresh

    I like the U-bolt idea better. The T-nuts are used to provide a "nut" that you can't get to. Used them for the seat bases. SHSU
  6. SHSU

    22' Islander rebuild

    @Capt Spaulding For leaking testing, the best route, by far, is to take it to a lake and put it in while hull is empty. Otherwise, while I agree not the best method, filling hull has been used by many, including myself. Some precautions and adjustments can be made to do it safely if you...
  7. SHSU

    1979 Starcraft 16’ SS Refresh

    I would agree that Moeller's strap points will be fine, its figuring out where on the boat that you will secure it that has me interested. Depending on your flooring, you might be able to do t-bolts through the plywood. I would stay away from anything just "screwed" for the amount of weight it...
  8. SHSU

    1979 Starcraft 16’ SS Refresh

    You are thinking along what I was thinking for support. Biggest thing is that center brace. Properly secure that to prevent it from bouncing would be a concern from me. Other thought on it is straps you are going to use, how many and where? I ask because (If I remember correctly) the 18...
  9. SHSU

    1979 Starcraft 16’ SS Refresh

    Looking good, what you planning for support under the fuel tank? SHSU
  10. SHSU

    1970 Starcraft Suncruiser 21' fiberglass runabout

    Take a look at the Boat Restoration, Building, and Hull Repair section, should have the info you are looking for. https://forums.iboats.com/forum/boat-restoration-building-and-hull-repair.40/ SHSU
  11. SHSU

    1979 Starcraft 16’ SS Refresh

    Is it just me or are the tires slopped inward at the bottom? As for the bolts, can you use a carriage bolt or something similar? SHSU
  12. SHSU

    New Journey

    Happy Admiral and a Happy First Mate!!! Congrats SHSU
  13. SHSU

    1979 Starcraft 16’ SS Refresh

    I am guessing you are countersinking the bolt heads? SHSU
  14. SHSU

    1988 Starcraft Mariner MR 220 V rebuild

    Was the original design for a center console or did the PO modify it? As I have no measurements and if nobody else chimes in, you might be able to look at your stringers and piece together where there are extra holes. Should get you fairly close to original location. SHSU
  15. SHSU

    The novice build: 1968 Starcraft SuperSport V-16 "The Boat"

    My thoughts from what I see: 1: Remove original patch 2: Create an oversized patch that covers the entire keels width and then sum to rivet into good aluminum. Make sure the length also covers at least 6 inches extra on both sides to provide additional support. 3: back butter with 5200 4...
  16. SHSU

    1979 Starcraft 16’ SS Refresh

    I ran my fuel line under the floor and came up at the back bilge cutout. Just make sure you use an oversize fuel line (I used 5/8) to help with making sure you get plenty of fuel to your water separator then you can drop to the 1/4. As for the fill and vent, I installed the fill on top of my...
  17. SHSU

    The novice build: 1968 Starcraft SuperSport V-16 "The Boat"

    First things first, don't panic. Plenty of us here have run into the same thing. You need to get in there with a wire brush and clean out that area. Need to get a clear picture of what you are working with. From there we can provide recommendations on next steps as needed. The other areas...
  18. SHSU

    1978 22' V5 Super Sport CC

    That's how I did it. I used a couple 2x4 with clamps for the flip. I think I used a couple blocks or screws to keep the hull shape in place once flipped so the hull wouldn't contorted as I worked on it, but can't remember for sure. SHSU
  19. SHSU

    1988 Starcraft Mariner MR 220 V rebuild

    What kind of foam you going to use? SHSU
  20. SHSU

    1979 Starcraft 16’ SS Refresh

    That is the best kind of First Mate, bringing the captain a beer!! When you go to do the coat it, make sure you do a scuff and wipe down before applying. Need to get the little coat of oxidation off for a good adhesion. That being said, good progress and way to go on convincing the park...
Top