Search results

  1. L

    Click No Start

    It really has me stumped. I have to be missing something simple unless I have a burnt wire somewhere. The old starter solenoid was stuck running. I would have to tap the solenoind to get it to stop. But it seems I am bypassing everything by jumping from the red wire to the yellow. Looking at...
  2. L

    Click No Start

    I took the starter to Oreilly auto and it tested good. I put 12v to it and it energized as well. I'm thinking bad ground. Thats why I took the starter off and sanded the mating surfaces. Is there a way to ground the starter?
  3. L

    Click No Start

    Battery is new marine battery. It is reading 12.4 v currently.
  4. L

    Click No Start

    Nothing. I jumper from red 12v large battery wire to Yellow and not a thing. Dead silent.
  5. L

    Click No Start

    I replaced the old starter. It was the one I would tap to get it to turn over. Ever since I put the new starter in I get nothing but a click. I will try to jumper from 12v red to yellow solenoid and let you know
  6. L

    Click No Start

    I have bat voltage traveling from the slave to the starter when key engaged. I measured it at the starter as well. (12.4v on big red starter wire and 12.3 on yellow solenoid wire on starter) However I do not have the 90amp fuse that you sent a pic of. The cable connects directly to the starter...
  7. L

    Click No Start

    I tried that. It doesn't do anything. I did replace the slave solenoid as well.
  8. L

    Click No Start

    Hello. This is a carb motor. I just got the boat. I took it out 2 times. It always clicked for a bit before it started but eventually it would turn over. The last time I took it out I had to tap on the starter to get it started. So that's the reason for replacing the starter. I am getting a...
  9. L

    Click No Start

    I have a 1996 454 Mercruiser. It wont turn over. I have 12.8 volts to the starter solenoid when I turn the key. So I took the ground wire off the battery/engine. It wasn't in bad shape at all. I cleaned the connectors. I removed the new starter and sanded were it butts up to the block since I...
View older results
Top