I have been buying the 2.5 gallon jugs from Amazon. https://www.amazon.com/Shell-Rotella-Protection-2-5-Gallon-Single-Pack/dp/B01LH7KPUY/
$42 for 2.5 gallons
the price of the correct carb gasket set is usually less than the cost of a complete correct kit. I have made base gaskets and bowl gaskets in an emergency.
Explain what you mean by "backfeeding"?
you mean putting AC in the outlet and then hoping to get lots of 12 volt juice out the other end?
They do not work that way.
Inverters only work one way. you put DC in on one end and you get AC out the other. As Ted mentioned, when you add an inverter...
No, that is most likely a scam site
Due to copyright laws, you can only get manuals from Mercruiser. Sites claiming manuals are usually phishing and scam sites
Get the manual from http://publications.brunswick.com/
If you bought the kit I linked to, it would have been delivered. However your 10mm double flare adapter would work just fine. you can also heat the end of the tube up and use a body hammer to roll the flare. however that takes a really long time.
First, welcome aboard
the fact that your motor is running rules out the ECM.
The fact its backfiring means you are running lean or your timing is off.
Not going above 3000 RPM could be you are running out of fuel or the motor doesnt know its in gear
First, empty the contents of your...
the only legal place to get manuals for your Mercruiser are from Mercruiser.
copyright laws prevail.
http://publications.brunswick.com/
any non-mercruiser site claiming to have manuals is most likely a phishing and scam site.
you need a mercury fuel line for the 1070's and 80's with the male and female bayonet connections.
do NOT buy an attwood brand. only buy OEM mercury or Moeller
This is saying you are running lean or you have a timing issue going to lean toward saying you have a carb issue
This could be a stuck valve issue. however hunting from 1000-2000 is usually a fuel system issue. could be a manifold vacuum leak.
New quadrajets have not been available for 30...
most off-shore go-fast fishing boats have a high-speed pickup facing forward, plumbed to a seachest with an overflow line with a check valve to vent excessive pressure
if you never do anything other than keep the motor running at idle, you do not need the accelerator pump (assuming you use ether to start it initially).
however if you ever want to open the throttle regardless of what the motor is in and pick up load (accelerate, etc) you need a working...
