Search results

  1. puffitu

    59’ evinrude 5.5hp

    Well now that makes complete sense. Got a new one on order. Thank you very much. This rebuild is an ongoing battle!
  2. puffitu

    59’ evinrude 5.5hp

    Having a heck of a time putting the water pump assembly back together. When all tightened down; I cannot budge the drive shaft to turn by hand. The specs don’t show any gaskets between wear plate and pump housing and seems extremely hard to turn…any insight ??? Model 5518
  3. puffitu

    Johnson 7,5 hp 2 stroke overheated

    What type/name brand of compression gage are you using?
  4. puffitu

    Force 120 problem

    As roscoe suggests; fuel related-check butterflies and carbs( floats, jets, needles) as well. Diaphragm/fuel pump would be my first stop. You got a filter before the carbs?? What year is your engine?
  5. puffitu

    Force 85 won't shift into forward but goes in reverse help!

    I found in my travels that not everything is per manual; manual is to get you there so to speak and the rest depends on many factors, such as elevation, temp, fuel, part quality, load, workmanship, luck, etc…certain final adjustments are made in respect to those factors. My two cents
  6. puffitu

    Force 85 won't shift into forward but goes in reverse help!

    Seems to me the shift rod is either screwed out too much or not enough. With mine…88’ 125hp; I’m about 3/4 turn out where it hits the sweet spot. Now I have another lower unit which is off a ‘90 120hp; it likes 2 turns out to flow in and out of frwd/n/rev like butter. But…when adjusting and...
  7. puffitu

    Float needle

    No problem glad it’s resolved
  8. puffitu

    Float needle

    Invest in some floats man-
  9. puffitu

    Float needle

    Glad to hear it!
  10. puffitu

    Float needle

    Well…jeezze Louise!
  11. puffitu

    Float needle

    Post pic of the faulty float; the one in question
  12. puffitu

    Float needle

    Swap the float to another carb to see if problem follows
  13. puffitu

    Float needle

    Well then you’d better check the float batteries-hard to tell from my couch and not being able to touch the carbs but wait for the experts to chime in after they examine the video
  14. puffitu

    Float needle

    Maybe the float is getting hung up??
  15. puffitu

    Float needle

    My set up is different from yours but in my little brain it seems like the needle is not doing what’s it’s supposed to in that bottom percolator. I reserve the right to be wrong though
  16. puffitu

    Float needle

    Let the experts chime in on that video-
  17. puffitu

    Float needle

    I’m certainly not an expert in regards to this particular issue you’re having, however, when I was having a leaky carb issue it turned out to be a tiny particle of paint or sand or something which was hung up in or on the wall of the jet inlet valve thing and this was causing the needle to get...
  18. puffitu

    Float needle

    Did you look on marineenginedotcom?
  19. puffitu

    Carb bowl leaking

    Can’t be just any gasket material; needs to be specific to withstand fuel/oil etc. I’m sure you know
  20. puffitu

    Carb bowl leaking

    On/off fuel/shut offvalve
Top