Search results

  1. C

    What is the correct name for this breaker?

    Upon closing up I think I confirmed the breaker needs to be replaced. When I hold the reset red button in everything works as long as the button is held in and when I let the button go ...nuttin.
  2. C

    What is the correct name for this breaker?

    Ok thanks again!!
  3. C

    What is the correct name for this breaker?

    Hoping I don't sound like a complete tool here but should I be able to temporarily connect the 2 leads together after I remove the breaker and until I get a new breaker if needed?? Just to keep my bilge pump connected for a day or 2 ??
  4. C

    What is the correct name for this breaker?

    Got it ,Thanks again
  5. C

    What is the correct name for this breaker?

    Would jumping the breaker confirm this is the issue as well or is that a bad idea?
  6. C

    What is the correct name for this breaker?

    Ok got it. Just testing the breaker alone at that point. Thanks. I just sprayed it down with deep creep Seafoam and will tackle removal tomorrow. I don't think connections are coming off easily. Thanks again
  7. C

    What is the correct name for this breaker?

    Ok ,it's seems like the connections are the issue. Too crusty. Neg on battery and probe on 1 connection reading was less than 1,when I moved probe half inch from the connection 12 came up
  8. C

    What is the correct name for this breaker?

    Thanks so I don't touch both connections within the housing? Both are red
  9. C

    What is the correct name for this breaker?

    I did get readings at that setting on the meter.
  10. C

    What is the correct name for this breaker?

    Not much room without removing a battery but the connections inside the breaker that I can see are pretty crusty looking. What setting does multimeter go.on for a test? I have a Greenlee DM55 ,I'm thinking V--20? Never used a meter before. Lol. Will try to post a pic of crusty breaker
  11. C

    What is the correct name for this breaker?

    Thanks, kinda weird that all was fine when winterized and it's just been sitting. Puzzling but will check .Thanks Charlie
  12. C

    What is the correct name for this breaker?

    Thanks guys ,will do.Pressing the red button is basically a reset??
  13. C

    What is the correct name for this breaker?

    I may have to replace this...whats it called? Everything fine when winterized.Now my Yamaha OX66 on my Grady starts and tilts fine but nothing else is working.Is this a main breaker?? Resettable or replace?? Puzzled . Charlie
  14. C

    OEM Yamaha aerosol paint code for 2000 0x66

    I contacted SIM Yamaha and the answer I got from them is that the 8D is for the leg and trim unit and the 4D is for the cowling with more metallic
  15. C

    2002 200hpEvinrude 2 stroke

    Lots and lots of issues with the Ficht line of Evinrudes .I would have to be buying the boat at a price low enough to replace the motor with similar age NON Ficht motor. With no Evinrude dealers I assume parts are going to more difficult to come by. Contrary to what DeepCmark stated, there are...
  16. C

    OEM Yamaha aerosol paint code for 2000 0x66

    Part Number: 64D-42613-00-4D (Superseded to 64D-42613-00-8D). Guess they are both the same color....
  17. C

    OEM Yamaha aerosol paint code for 2000 0x66

    There were 2 paints listed, guess I bought the wrong one . Thanks
  18. C

    best muffs to use on mercruisers?

    I have had Mercruisers with outdrives for over 30 years and never had an issue flushing with any muffs, they all work fine for an outdrive.The best seal I have ever had ,if thats your concern, are with plastic body with rubber cups fed on one side. For winterizing thru the drive I always duct...
  19. C

    OEM Yamaha aerosol paint code for 2000 0x66

    The vent on the motor cover is badly faded so I want to sand and refinish it with aerosol.The "bluish" is what is throwing me off.I used 08D and its nice paint but the color had a blue tint which I dont believe this motor ever had.
  20. C

    OEM Yamaha aerosol paint code for 2000 0x66

    I purchased what is supposed to be OEM color Yamalube 08D "Dark Bluish Gray" It is surely NOT an exact color match.I dont know where the "bluish" part comes in because the motor is graphite gray..I see 2 colors available 08D and 04D .Anyone know the correct code?? my motor is a year 2000...
Top