Search results

just a guess but a green/white wire is usually for the shift interupt,Looks like a different module was installed

It was running with low/no gear oil. shift into fwd, remove the drive and I suspect you will find the oil that was lost .You should have also seen gear oil in the bilge area.This is why deive removal is suggested at end of season to inspect for gear oil or water in the bellow. I remove mine...

sound is the bilge pump running. Bad float switch or its wired incorrectly

Save your self some aggravation and cut the oil hose first before trying to remove the housing. Failure to cut it first WILL result in breaking the nipple off the transom end,Get new hose 2 inches longer and some Power-Tune and special hose pliers . Install the hose on the housing end ,install...

next time use heat where the sealing ring is then a regular spanner will remove the filter

when/if you manage to remove it ,remove the pickup tube from the fitting.It just unscrews the same way. look inside the tube and you may see a SS stent inside the tube, It simply pull out

some heat and some "Free-All" will remove that screw

I developed this repair https://www.clubsearay.com/threads/for-mercruiser-only-shift-cable-thread-repair.93826/

https://video.search.yahoo.com/yhs/search?fr=yhs-mozilla-002&hsimp=yhs-002&hspart=mozilla&p=Volvo+Penta+DPS+shift+cable+rep%5Blacement#

guessing its a hole for the oil pressure sender

could be from a bad manifold or riser leaking into a cylinder

Bondo, pretty sure those are 3/8 inverted but what about the hose from the trim pump? 7/16ths??

inverted thread size of power trim at cylinder and trim pump to manifold block Thanks

most of us acquire a old control cable from a shop for free and use the SS solid core as a guide

those are not legal below deck in a I/O

could have replaced the block and forgot the stick?

same one here ,great tool

dist should swap with no issues ,I have a2 barrel vortec manifold that was on a 5.7

any oil leaking from that shaft usually indicates a inputshaft seal is leaking oil into the bellow area. Need to pull the drive

remove the 90`S and install straight ones