Search results

British made in the 50's and 60's Im getting you some more info bear with me. Prop pins are notorious for shearing from what Im reading

Transom is where the brackets hold the motor to the boat

Does it have a tag on the transom with a model #

And dont only search Ted or Gamefisher, those are all Eska motors. They have a leg that was made by Clinton with a Tecumseh power heads

Its a 75 and a 3hp. 32:1 fuel mix and you can find one on ebay or amazon but you will have to do some modifications

Also I would run a 24:1 mix if its pre-1974. Thats what the service manual suggest.

Can you post model number. But however initial start up is one turn out from seated both high and low speed jets. Adjust from there to achieve max performance. Your post says 3hp and it looks to be a 5

FYI that is made by Force. Probably not hard to find on ebay

1974 made by Chrysler its a 6hp

Is it possible the drive shaft is stuck in the power head. I had a late 80's model made by Force that the shaft was stuck due to the splines being wopped up

217-59430 is a 1971 5.5 hp

Share a model #

So its an Eska? or McCulloch? Sears had motors made from multiple sources

Did you see the private message I sent you?

My bad number 28. The list says rubber o-ring

Mite wanna pull the powerhead and look at the splines in there to make sure they arent stripped

I swear Im getting old. It was right in the description that it was a McCulloch.

#29 o-ring goes with jet

What manufacturer? Got a model number. Its not an Eska with that carb. Is it a McCulloch?