Search results

Yep, it's getting that time, a lot of folks around here do the rental gig but my problem is I don't want to move.

Well if you want to rent it cut the grass, home can wait!

Mines half inch bronze.

Yep the CF is great for an original layup but not worth the expense for a patch. Looks like you have chamferd the area well enough though it's hard to tell dimensions from a picture. Stick with the 1708 and poly.

Shut the fuel line off an run it until it stops running.

Black smoke is too much fuel, I'd go back to the carbs.

Maybe a truss from the head of the divit to a point on the hull. It's not a good answer but might serve.

Yep,

I think the op has a direction, no matter what prop you put on a 20 ft pontoon with 50hp motor it's not for speed but for engine love.

Yep, I'm not familiar with the boat, righting moment may be a critical point as well.

Yep, leverage will rip the pedestal off the deck.

Expansion and contraction due to temperature maybe?

12 volts or so..... understand a fully charged batt is 12.7, a dead batt is 12v..the or so makes a big difference.

IMHO cutting just the cap of a stringer and digging it out then fitting a new one in would be tedious and time consuming, not to mention the bond may be questionable. I would consider taking all but an inch out so you have a bit of a guide.

You need a motor, get one, what ever it is the folks here know how to install it. You get a motor and help is available. Lots of opinions and most are good.

Yep, some times folks have fun but not necessarily is it help, although most of the time the information given will be useful but maybe not for the present question.

Bent prop is similar to mis-placed frets on your guitar

See post #2

To get a back to the op, if you're boat is rated for the upgrade the swap is doable. If not, then you could have some liability in an accident.

Very true, nothing like garden fresh!