Search results

Twin pods (Volvo diesel and IPS pods) Under a Cruisers Cantius 48

Prop glide is what my bud uses on his moored boat

They are bolted together. The stack arrangement DOESN'T MATTER

Why are you replacing the pump in the first place? Was your pump leaking, or pushing fuel thru the tygon hose? If not are you replacing the pump just for the sake of replacing the pump? The stock pump is a Carter marine pump. About $50 at places like Summit racing or Jegs. Do not buy any pump...

What is your budget? Your boat came with a 1992-1995 5.7 liter. However a 1996-2013 5.7 will bolt right in Your current motor most likely has bad exhaust manifold, so you have to replace them The front accessories are probably good I personally would look for a low mileage 1996-2000 5.7...

Hatch latch should be one of these. https://tacomarine.com/specialty-hinges-latches

Have you serviced the points?

Some of those sleeves are plastic, some are copper (fabricated)

The LT motors have been used by Volvo since 2014. They are not new. The 6.2 puts out 430hp

One of the many Chinese ladders on the market

Use an analog meter

Your boat needs a full restoration. Last thing to rot is the floor. Decades after the stringers and transom Read link 14 in its entirety, then the other links https://forums.iboats.com/threads/how-tos-and-other-great-information.283508/

Guaranteed it's caulk. I have been on the Pioneer shop floor

When it comes to boats, you really need between 3 and 7 boats to fit needs Everything from a kayak to a cabin cruiser

The center console just sits in a divot in the floor on the pioneer. The caulk is 95% cosmetic to keep crud from growing in the crack It should still be UV stable life-caulk. https://www.boatlife.com/product/life-calk-cartridge/

That transom well needs a few reinforcement plates added. Also check for cracks at the mounting flanges to the deck structure. Have seen many 'toon pods come off in a "catastrophic disassembly" over the years

Too lean, look at your fuel system

It's going to take another few months for the market to correct itself Those with over-priced goods will just sit on them

Keep the politics on X and facetube

find a welder that does aluminum. (Hint, even your local radiator shop welds aluminum) Whome ever suggested JB weld is an IDIOT!. do your self a favor and do not listen to that