Search results

Measure water flow from the raw water pump

Mix up thickened gel, trowel it on with a notched trowel, rol over it with a bedliner roller to make a great nonskid

Old boats will cost you about $4000 to restore the hull and about $2500-$3000 for an interior. Not to mention, you need a motor and rigging

Any company can ship to canada. Just have to pay customs charges. However, i would pull a longblock from a S10 truck

the outboard stator that mercruiser put underneath the damper was limited on output (really really low output). additionally, it requires a water-cooled voltage regulator that is prone to failure. the voltage regulator is about $500. the stator coil is extremely simple, however that is not...

be wary of an automotive paint and body guy doing work on a boat. you cant use automotive fillers on a boat hull.

a 2-jaw or 3-jaw puller is the right tool to use. doesnt take much pressure to pull the hub off the taper.

Happy anniversary of your birth.

they have been working on EV battery recycling for 5 decades. they also have been working on E-waste recycling for the past 4 decades. however until the producers are held accountable for end-of-life recycling, it wont happen. a good example is the canadian OPEI stewardship for...

welcome aboard what does the paperwork (title, registration, bill of sale) say it is. without those, it is most likely a yard planter. Depends on location, however if your neighbor didnt have the paperwork or registered in his name, he legally didnt own it and neither do you. looks much...

agree with Ted, since you tore it down and didnt pressure test prior, all you can do now is visually look bad elbow joint manifolds? heads rusted thru? was there water in the exhaust passages of the exhaust manifolds? are the valves/exhaust ports nice and black from soot or rusty?

doubt its the coil. usually never is the coil being a 2001 most likely it is the trigger assembly in the distributor (common issue). do you have the old 2-wire trigger assembly (failure prone) or the newer 3-wire. the old two wire ones were also not conformal coated. if you have the 2-wire...

move the cable to the other side of the linkage behind the handle

OMC stringer. either a stinger 400 (with the 3.0) or a stringer 800 (with the V6 and V8s) 80-W90 marine in all 3 gear boxes

bellows kits are about $100 for all the bellows. you already paid for the labor. yes, boats have sunk due to bad bellows however more importantly, a leaking bellows could be rusting your u-joints and input shaft on the drive, causing you thousands of more dollars. find the leak - now

pull the drive and reach up

that boat may have only been rated for 10hp. the boat is similar in size to the wooster hellion I had, which was rated for 10hp. it would fly with 15. however because it was so small, the hole shot sucked, having to lean way forward over the steering wheel to get out of the hole remember...

first, welcome aboard second, without knowing what OMC drive you have, we can not answer. having a specific year, serial number and model number helps. on the stringer drives, there are electric shift, hydro-mechanical shift and pure mechanical shift then there are the Cobra drives and...

agreed, since the drive had to come off and the motor had to come out to replace the transom. not sure why they didnt replace the bellows with a dry bilge, back the boat in the water (no need to remove from trailer) get in the bilge with a flash light, mirror and your phone (can use the...

the Covid pandemic had the entire planet buying boats, RV's and renovating their houses vs going to disney, on a cruise, or flying to europe. if you bought a new boat today, the only way to see it in July is if the dealer placed the order in February or sooner. most boat builders are scheduled...