Search results

did they hook the motors to a laptop with the proper software to look at everything?

thanks, make sure you use a pin that will not rust away this time

I would have to say water was inside the motor. how come the poster did not mention draining water and oil out?

how does a gasket fix the hole in the combustion chamber?

see if you can find another head, or see if someone can patch it those other holes look like they may be there on purpose

that is good news. how did you shear off the ends of the cotter pin with the nut in the way?

I am not familiar with that Suzuki, but would guess the lower unit may need to be opened up to get the shaft back into place

I would want to know if this motor is an interference motor, (if timing is off will the pistons hit the valves and bend / break things)

sorry, just notice he said burnt fuel and oil, not unburned. so that burned fuel and oil comes out the exhaust

2 people have given this motor away, so you need to take things apart to try and see where that water is coming form. maybe bad tube or grommet it sticks into, or a hole in some other part of motor

does the rail pressure stay in spec? if so, send the injectors out for testing and cleaning

pulling and testing the sensors, and measuring the temps at the sensors location might give you a clue if there is an overheat condition or not

over oiling maybe or one or more cylinders not burning fuel properly

torque the nut properly and go

My guess is hole in exhust guide or gasker bad

are you saying that the freshwater lake he runs the motor in is likely outside the PH of 4-8?

maybe I need more chemical training, because I do not see how hard water deposits would eat the aluminum away

I was thinking the same thing. maybe cut the brass nut to get it off and then the pin ends with a drimmel tool

does the red wire to the key switch have 12 +? when turning the key to the on position it should put 12+ on the yellow wire. Should be some fuses on the motor

some motors might have a spring-loaded ball on shifter or other place/linkage that helps locate and hold linkage in certain place Not sure what this was supose to mean " It appears that Canada was struck before he decomissioned the boat. "