Search results

  1. R

    94 OMC 200 Oceanrunner- Parts?

    I have a seloc book coming to understand the wiring. Have a harness from an 89 same motor. A few things. First I"m missing the rubber block that seals off the fuel/elect lines going into the motor housing(wrong word??) Where do I buy that? Second-- I have a wire plug on the newer motor...
  2. R

    HELP-Nut on top of fuel tank outlets needed???

    Don't know if this is the right place, I don't know what to ask for or where to look. Getting my rig closer to water testing. Used 85 Hydrasport 21 CC. It has a poly 80 gallon tank(what I was told anyway) There are 3 fittings on top of the tank. 1 Vent, 2 sources of fuel feed.(and of course...
  3. R

    Ground bolt through hull? Brass or bronze silicone

    Have a disc that appears to be brass or bronze, its about 2 inches round. Had a brass looking screw that goes through transom to hold disc to underwater line on back of transom. Was used for ground(correctly???) I could not save the bolt and now need 1 bolt. Unfortunately I can't find one...
  4. R

    What Sending unit? What pressure gauge?

    200 hp Johnson 94. Want to put a water temp gauge on it. What size NPT sending unit? Where do I find info on where to look to connect it? Also my book says, different NPT sizes but mentions inboards?? Is this not for outboards? Sorry if its a dumb question but want something to tell me if my...
  5. R

    Anti Siphon fuel line required??

    Need to buy a barb for my boat project for the below deck fuel tank. 2 questions. First there seem to be 2 tubes to " draw fuel from" side by side within an inch or 2. Which one to use. Have not pulled either out... 2nd, a supplier lists normal barbs, but also a coast guard required anti...
  6. R

    93?? 200 HP Johnson ?s

    First where do I find the serial number so I know what year model it is? Second. Have a harness from the prior 86 or 89 Evin 200(its been a long story and a year since I"ve touched the issue so forgive me for not knowing exactly....) The red plug seems the same, but there is a smaller pin plug...
  7. R

    Required Gauges?

    Trying to get the 21 CC Hydrasport up and running. Short scoop-- 93 200 hp Johnson. Bought the boat, has a tach and voltmeter and fuel guage. I don't want stuff I don't need, will be looking at a trim gauge, and a temp gauge and water pressure gauge. IF I have a temp gauge do I need the...
  8. R

    Anchor fuel tank?

    Have an 85 Hydra Sport 21 CC. It has what I'm told is an 80 gallon plastic fuel tank. Boat was bought dissassembled. I see places where an anchor strap could go.... Boat has had work done to it in places. I had to glass in a 2x6 in the bottom as a tank stop to keep it from sliding to the...
  9. R

    Glassing table?

    I need to wet down quite a few mats to tuck in areas and also strips to rebuild the top of the transom level IE build up a few inches max. Its been some years since I did this, kinda think I recall we worked on a table covered by something, such that we could cut the mat, wet it both sides and...
  10. R

    Through Hull Transducer Help

    Ordered a B60 20 degree through hull transducer to put in this weekend. Have a question-- I cannot see the inside bottom of my hull in many places. I have two "steps" in the bilge area either side of hte drain tube. A float switch screwed to one side, and a pump to the other. Evident that...
  11. R

    Re-set up on 21 Hydrasport CC ?s

    Didn't get much ply in the other forum, IE no takers. Placing it here in hopes, and hopes I don't offend the forum either. Thanks, Jeff Hi Have some time again. Have replaced the transom on my boat project and have a 200 HP Johnson waiting. Need some advice, next thing is to drill and...
  12. R

    Setting up 21 Hydrasports

    Hi Have some time again. Have replaced the transom on my boat project and have a 200 HP Johnson waiting. Need some advice, next thing is to drill and replace the drain plugs. With some epoxy? How about screw together drains?? Or buy the brass ones and a tool to flare them? Next the motor--...
  13. R

    Sealing Transom Penetrations

    Have drain plugs etc... to put back into a poured new transom. Plus adding transducer. What is best way to seal holes these days? I"m not worried about price so much as I want to do it once and do it right. Thanks, Jeff
  14. R

    Ground Anode?

    HI Same 21 Hydrasport I'm trying to get up and running. (pardon the rate of questions as I try to get a full days worth of projects rolling every other weekend and then the parts ordered and here and call the inlaws and we have a work day on the boat so its weird I guess) Anyway there was what...
  15. R

    Motor Mount Height, want to do it right!

    21 foot Hydra sport. Transom repaired. Am now ordering a CMC manual jack plate and will hang a used 200 Evinrude on the plate. Want to make the best use of the plate as to further adjustments. Need to know where is best for motor height to start with and to set the jack plate at that...
  16. R

    General Re-Wiring ?s

    Hi Need some serious input. Have an 85 HydraSport. Long story bought used. Bad motor. Finally have a used 200 laying here. Transom was bad and fuel tank was removed when we bought. So now the transom is fixed. And getting close to remounting the fuel tank etc... Trying to replace...
  17. R

    63?? Merc 20 hp parts source?

    Hi <br /><br />Brother in law has this old Merc that needs a water pump(impeller or whole thing?)<br /><br />Anyway all I have for info is <br /><br />Model Merc 200, Keikhaefer Corp, Cedarburg, WI, Ser# 1295176<br /><br />Is there any hope for aftermarket parts?<br /><br />Thanks, Jeff
  18. R

    Removing plastic part under motor housing

    1982 Evinrude 200 HP. I'm still having troubles with rusted bolt heads etc...<br /><br />The metal part that has the clamps for the elect, fuel, shift cables etc.... and has the latches that hold the hood in place. Just under it there is a piece of plastic. Its held in place by 2 bolts on...
  19. R

    Welding hole in block?

    So I have this hole in my engine block. Is welding a real option? I was snooping around and found one place in FL that said average cost is 125 to weld a hole shut. There is a ton of difference between that and a new or used engine.<br /><br />How reliable will the engine then be IF the hole...
  20. R

    200 Evinrude-- hole in block?

    Got my engine further apart. We ended up taking this thing apart in a weird order. Suffice it to say we go to(sorry I don't know the boat motor terms probably) taking the carbs off as a unit. Then the plate(intake?? has the reeds in it) off behind the carbs. Which reveals a hole in the (would...
Top