Search results

  1. R

    rodbolt, F9.9MSHC questions

    I have a 2004 F9.9MSHC that is running perfectly. On boats.net website I have found a Remote control kit for this motor and would like to know if it is possible to add an electric start. If so would you be able to supply some numbers/site to get what is needed? Thanks.
  2. R

    New boat purchase

    I just got the call to come pick up my new boat, new to me, a 1997 Wellcraft Excel 23 with a same year 200 Johnson ocean runner. It has Lowrance depth finder, Lowrance GPS with differential installed for this area, and VHF radio plus all the standard equipment for the boat. With dual axel...
  3. R

    New Boat

    I finally got back on the forum and wanted to post I have found a 97 Wellcraft Excel 23 WA with a 97 200 Johnson Ocean Runner. The price is $5k, complete rig with fish finder and GPS. How does that sound?
  4. R

    Returned Home

    Thanks to some help I have been able to get back on the boards. I have been gone for some time but am getting back into boating and wanted to get back on here. Hello everyone.
  5. R

    Correct prop?

    I am in the process of setting up a new (to me) boat, 1973 Wellcraft, V20 steplift with 1990 200 hp Evinrude. The last prop I ran resulted in 42.3 mph (gps) at 5400 rpm. The prop is an aluminum 14.8 dia with 17" pitch, evinrude # 763467. I have a hydraulic jack plate and the cav plate is...
  6. R

    I'LL tell on myself!

    This is my first time ever posting on this particular topic and don't know if it belongs here or not, so here goes. I recently had one of my motors overhauled, a 1986 15 hp evinrude. It was jam up, which means, in great shape, running smooth, cranks with one pull or first push on the...
  7. R

    1990 200 HP Evinrude

    On this motor there is a place for a screw in temp sensor located on the right head at the top. It is on the left side of the thermostat housing. I believe it uses 1/8 NPT. It enables you to put a temp gauge on the dash. Now the question. Is anyone familiar with this thing and do you know...
  8. R

    1990 Evinrude 200 hp hydraulic steering

    I am acquiring a wellcraft 20' with hydraulic steering (helm and lines to stern). There is no cylinder to mount to the motor and it seems like all the sites I can find exclude the 77-90 model rude 200 hp. What gives? Any ideas where I might find the required cylinder?
  9. R

    1984 Johnson 40 hp

    I went fishing on the flats yesterday and on the way back in the motor cut out, sorta like fuel starvation. One pump and the bulb was tight. The vent screw was loose. The tank is a 6 gallon plastic with new fuel line and bulb. I could hit the prime and the motor would pick back up and...
  10. R

    Minn Kota Terrova 55/AP

    I have been looking online at these trolling motors with the auto pilot and thought it might be a good idea to seek some input here first. Does anyone have an Auto Pilot type of trolling motor? If so, how do you like it, or is it a PITA?
  11. R

    Johnson

    I am looking for a wiring harness for a 1967 60 Hp V4. Anyone have any suggestions?
  12. R

    84 Johnson 40HP J40ELCRM

    I have searched for this problem and can't find any reference to it. Seems lots of problems with motor not starting. My problem is the motor won't stop running. I'm assuming it is a problem with the grounding circuit from the switch. Yes I have ordered a manual, but it isn't here yet.
  13. R

    J40elcrm

    I just acquired this 1984 40 hp Johnson. It runs good but the cowling/hood/whatever you call it is missing. It is one of those that has the lock handle on the cowling both front and back. Anyone have any idea where one might get his hands on one of these?
  14. R

    Starter

    I am looking for a starter for a Johnson outboard.. Model 40E75C. It is a 40 hp 1975 motor. Any help will appreciated.
  15. R

    40 HP Johnson

    I was given this Johnson today and the previous owner said it ran good but then just bogged down and only ran on one cylinder. The model number is 40E75C. The serial number is J425571. Using previously posted info under "what year is my E/J' it is a 75 model. When I got it home I pulled both...
  16. R

    Questions about lower unit

    I have two 90 model 200 hp evinrudes, set up one standard and one counter rotation. The 200 with the standard rotation will turn 6000 rpm at wot no problems. For reasons not stated, I put the counter rotation lower unit on the same motor and it will only turn 4800 rpm at wot. The two props...
  17. R

    Wiring harness

    I have acquired another boat I am mounting one of my 200 hp evinrudes from the dusky to the other boat. Problem is, the other boat has a Mercury control harness on the boat and I have to replace it with the evinrude harness. What I am looking for is a source for the boat half of the evinrude...
  18. R

    1989 Sea Ray 220 OV

    I just acquired this boat with an aluminum dual axel trailer for a song and a dance. Don't laugh, down here in South Ga it is really hot to be doing a song and dance. Anyway the reason for posting here is questions about the motor. It has the 4.3 GM 175 and downloading info from Sea Ray shows...
  19. R

    New Rod

    Has anyone ever heard of a Fenwick HMG rod with Carbon Veil technology? The model is GS70M, 7', 1/4 - 3/4 oz. lure. I was wondering if there is any opinions on this particular brand?
  20. R

    Rigging Counter Rotation Outboards

    As has been posted before, I have a 256 Dusky, 1990 model WAC with twin 200 hp evinrudes. Both motors are 1990 models. Does it matter what side the counter rotating motor is mounted? I have searched the site and Dhadley stated "it depends on what type hull and what you want to accomplish"...
Top