Sanded with 200 grit/wet and got down to a yellow color. From here do I wet sand with the continuing upper level sand paper and remove the yellow or do I buff with a good compound? I feel like I have not removed enough but I need some advise. Thanks.
Wire burned into two pieces and reconnected and still have no activity on trim buttons when pushed. Looked for fuses and do not see any. Any troubleshooting ideas?
Does anyone know what kind of engine hatch cover were on these boats originally. I have a marine plywood cover with carpet on it and I would like to find a fiberglass cover if possible. Any ideas help?
I am looking for a fiberglass engine cover instead of the marine plywood and carpet covered one I have now. Does anyone know if they originally came with a wood or fiberglass. I have a 1982 26' Sundancer and thought about trying to find one off an unused boat.
Is there an adaptor for changing the oil? Something that will connect to bottom and help drain oil somewhere instead of bilge area or by pump. What is the best pump to use. I am concerned about not getting all the oil out with a pump.
I used Marine Tex on a small scratch and it seemed to setup like rubber. Did I mix it incorrectly? I have some small holes in engine compartment and expected it to setup harder but a bubble appeared and it feels like rubber. Does it harden with age?
I have a transom bracket leaking and am wondering what is involved in repairing. I am told by the previous owner that some tips are broke off. Any suggestions.
I need to put a new headliner on the ceiling. I have looked at vinyl and other materials. Does anyone have any experience with this type of a job. I plan to glue it to a panel of some kind of stiffness with some insulation. What is best glue and way to attach?
We just bougth a 1982 26' Sundancer and what is the best way to drain the water out of the waste tank? Do I need to buy a pump? Our head is a portable so only sink water is in tank.
We are planning a trip from Pascagoula, MS to the Keys. Will leave MS and head down the intercoastal waterway most of the time. Since Katrina can anyone tell us what to look out for as far as gas availability, storm debris, and best way to go.
Can someone tell me the best way to repair heavy oxidation on my 26' Searay Sundancer 1982? I have read so many different ways that I would like to know what works best from someone's experience.