Search results

  1. MickLovin

    Chrysler 100hp Carbie kit

    I have noticed in the carby kits and parts catalogue, that they show a inlet needle, seat and gasket as well as a inlet seat gasket, I noticed on the bottom of the inlet seat a rubber bottom to it, is this the inlet seat gasket as I haven't seen a gasket on my 100hp or my 75hp carbies in this...
  2. MickLovin

    Force 85hp low top speed

    Re: Force 85hp low top speed Ok I just read this post and Winstoper has the same prop as I had on my 75hp A511265 Chrysler which ran my chrysler 75hp fine but I didnt expect more than 40MPH, at 5000rpm+, I have a 17ft carribean and the next photo is my 100hp but I dont have a prop photo
  3. MickLovin

    Prop Codes and compatability

    Ok I took off my prop from my 75HP 1980 Chrysler, it is a stainless steel prop with a code of A511265, it may be a volvo penta prop as when I had it repaired, that is what they called it. Here's the thing, my prop on my 100HP is smaller in diameter and has a code of 528.23., as I can't find...
  4. MickLovin

    Filling your tilt trim motor on a Chrysler

    Hi guys, I can't see in my manual how it says to fill my tilt trim motor, I was under the impression you fill it when the motor is tilted up, but after reading a thread about a problem with a tilt trim, Jerryjerry advised that it is to be done lowered :confused:, can anyone tell me which is the...
  5. MickLovin

    Can a carbie jetted too small get cold 100HP Chrysler

    Just out of interest sake I want to ask a question about my carbie and what happened to it out on the water, firstly a bit of history, I put a 75hp 066 jet in my 100hp carbie when they should have been the 080, not knowing at the time it would or could make any difference, it was more of a...
  6. MickLovin

    Knock when i decellerate 100HP Chrysler

    Re: Knock when i decellerate 100HP Chrysler Just a couple of pics of the boat I have at the moment with the 100HP Chrysler on it.
  7. MickLovin

    Knock when i decellerate 100HP Chrysler

    Re: Knock when i decellerate 100HP Chrysler Hey frank that seond pic, the boat looks like its hardly touching the water, reminds me of my last boat, a Fletcher Arrowflyte 14" with a 115HP suzuki, when I had it running nice it would hardly touch the water, but the motor was old with bad...
  8. MickLovin

    Knock when i decellerate 100HP Chrysler

    I took my boat out with the 100hp chrysler and found it wouldn't go onto plane, it felt like I had an electrical problem as sometimes it would not even start as well. It seemed to idle ok but as soon as I opened the throttle it bogged down and had no power. I took it home and replaced the cdi...
  9. MickLovin

    100HP Chrysler 1979 Model 1007H9A - Carbie covers

    Hi all I am looking for 2 plastic carbie covers, I can't see them in a parts list so I am unsure if this model came with them or you can get some to suit from another hp model. If you know of any available please let me know as i have scoured ebay etc looking for some. :eek:
  10. MickLovin

    Suzuki DT115HP 1984 no spark #3 and #4

    I have no spark on #3 and #4 of my suzuki 1984 Dt115hp outboard, I changed leads to see if it was the coils and the coils work fine on #3 and #4 but no spark when connected up from cdi as #3 and #4 only work connected to #1 and #2, does this mean a CDI problem or could it be the stator, I don't...
  11. MickLovin

    Ring Free Results So far

    Hi, after using ring free for about 1 hour at 2 half intervals, I have found that so far my motor is idling much better and it has spat out a lot of black crap from the exhaust. The spark plugs are still fowling but this may be due to ring free still in the system as a shock treatment, It has...
View older results
Top