Search results

  1. cobbcfi

    J225TXEDE stator and magnet part numbers? Need help again, and again...

    You all have seen some of my posts and my questions over the years.. And I know the stator is failing and the flywheel magnets shot free and took some "stator" metal with them.. What I don't get is: 1. When I search for a new 35amp stator, I get this result "Replaces OMC Pn #584643,763779...
  2. cobbcfi

    OK, I concede.. I have a few questions before I send it to the mechanic!

    First off, I was going to have mechanics with the proper tools remove the flywheel so I could re-install a new stator.. Now I think I need to hand it over to them because how would I replace the missing magnets in the flywheel?? I don't see J225TXEDE flywheels for sale anywhere... Aren't...
  3. cobbcfi

    911!!! This cant be good, found metal plates and magnetic objects below the engine!!

    While trying to figure out what was holding up my lower unit to check the impeller that I haven't replaced in 10 years, I found these objects inside the engine compartment at the bottom towards the back.. They were all stuck together (because of whatever the magnetic objects are (2 of them)...
  4. cobbcfi

    96 225 impeller, never been replaced.

    My buddy has been tormenting me for years about replacing my impeller, which I haven't done in 10 years, is this something I need to do soon? How hard is it to replace the impeller?
  5. cobbcfi

    I need help finding 10" plug wires for 96 225

    For the life of me I cannot find a set of 6 10" plug wires for my engine 96 Johnson 225.. They have them available in 9" and 12" but not 10".. It seems that Mallory Marine wires are the top of the line and would like to get them.. Any thoughts on getting a custom DIY kit and trusting that...
  6. cobbcfi

    External Fuel Level Indicator

    Although I have searched and come up sort of empty, like my fuel tank does when my gauge says I still have some, I am looking for a fuel level gauge that I can install to the side of my fuel tank that with a little effort and moving a floor panel I can look down at a glass tube and it will show...
  7. cobbcfi

    225hp 2-stroke VS 300hp 4-stoke? Pro's and Con's?

    I am looking for some insight into the Pro's and Con's of swithing out my motor this winter. I currently am running a 225 Johnson Oceanrunner and am wanting to up-grade. Max HP for my boat is 300hp and being a typical male, I want the biggest I can get. What are the Pro's and Con's concerning...
  8. cobbcfi

    It's spring and I have lots of questions!!! As if there was even a real winter.

    To start things off I have wiring and fuel questions plus stater concerns.. 1. I am replacing all of the wiring from the dual batteries to the engine. I can find the wires just fine (I.E. 18" 2GA AWG Red times two and one 2GA AWG black. The wires from the switch and battery to the Solenoid...
  9. cobbcfi

    Maintaining a starter?

    I am not having any starter issues but fired up the boat today and it took the starter a few raps with a hammer to get the spindle to pop up and engage. Once it engaged after 10 or 12 attempts it engaged every time. My question is how to lube a starter or maintain one to prevent this in the...
  10. cobbcfi

    Tandem Axle Trailer FLOATS!! What can I do to sink it?

    I have a tandem axle trailer and have been fighting this floating issues for years! When I get to the landing I have to wait for a certain slip, if it's windy or at the beach with a ripping 6-knot current and seas breeze to boot, so that my boat washes up to the landing docks and not into...
  11. cobbcfi

    Changing wheels to match my truck. Although it's 6 lug.

    I want to change the basic trailer wheels on my tandom axle to the same rims (stock) on my GMC Yukon. Although the trailer is a 5 lug and the rims are 6 lugs. 1. Anyone know where I can find replacement axle shafts to get a 6 lug pattern or should I just use and adapter? 2. What kind of...
  12. cobbcfi

    What is the best "High Gloss" sealer? Resins, Varnish, Clear Coats?

    I asm looking to achieve that big boat fighting chair beautiful deep clear coat and wanted to know how to do it? I am looking for long life glossy clear, and my searching has sent me to West System's epoxy resins. Roll on a couple of coats of Epoxy Resin and Hardner and then spray with AwlGrip...
  13. cobbcfi

    Whats the best wood to use other than teak?

    I am wanting to get rid of my plastic battery and live well compartment covers and make some out of wood with handles. Which wood holds up the best in the elements other than teak. I heard "Yellow Pine" and "White Oak" were two good options. I am also going to build alot of other stuff for...
  14. cobbcfi

    Small Fighting Chairs. Anyone know how to build them, minus the $3K price tag?

    I am extremely wood savvy (converted my 3 car garage into a wood shop second only to the "New Yankee Workshop") and steel fabricator knowledgeable (Custom restored several cars including my replica Shelby Cobra 429).. I am looking to replace two small seats in the back of my Tcraft 24cc with...
  15. cobbcfi

    Prop Nut Torque?

    What would I torque a prop nut to on a 96' Johnson 225... It keeps backing up to the cotter pin..
  16. cobbcfi

    Single Johnson 225 conversion to twin Johnson 150s... Good Idea???

    My bro and I have briefly talked about converting our Single screw to twin screw in order to get a little more top-end/power and fuel economy.. It seems our engine will sell for a bit less than what a 2 smaller 150s would sell for so it seems not too far out of reach.. We have an old 1983...
  17. cobbcfi

    Need help! 2 days till the big run and '96 Johnson 225 wont run! Please help...

    ...Our boat has issues starting after extended towing and we got it to Charleston and it won't start. Messed around with it and can only get it to start and stay running at 3/4 throttle or 4K+ RPM's.. Shooting ether and all other efforts fail to start it a idle and reducing throttle below 3500...
  18. cobbcfi

    Idling around 1900 rpms.. How do I adjust? Johnson 225 Ocean Runner

    Fixed most of my issues thanks to your help but have one more problem, before the next one. I am Idling (out of water with earmuffs) around 1900-2000 rpm. How do I adjust the idle so I am not slamming gears when I shift into forward or reverse? What would the ideal idle speed be?? Thanks...
  19. cobbcfi

    How does this happen?? Watch the video please. Johnson 225 Ocean Runner

    I posted a thread about my 225 Ocean Runner starving of fuel and stalling at low RPM's and slow cruise unless the fuel balls was pumped regularly. Have I found my issue here? It's on the port side of the motor connected by a "T" adapter to the fuel system and has wires going to it. There is a...
  20. cobbcfi

    1996 Johnson 225 Ocean Runner, How much does it weigh??

    About to do a SeaCast job on my rotted transom and I am wondering if I need and engine lift or 2 or 3 buddy's to lift it off the transom and est it on the stand?? Thanks in advance
Top