Search results

  1. patrick4266

    can I pour premixed gas into my jeep?

    I have some old, 2 months but I did use sta bil, gas and I want to use fresh gas as I am trying to get my motor running right and I want to eliminate all possibilites. Anyway can I pour it in my jeep?
  2. patrick4266

    anyone have a 1985-70hp evinrude

    I really need to ask some one with that hp and year motor of where the power pack wires go's to what coils.
  3. patrick4266

    1983 johnson 70 hp J70elcte running on one cylinder

    Compression is 120 on all 3. I rebuilt the carbs, good spark Here's the problem. It seems to be only running on #2 cylinder. I can put both hands over one and three carbs and it runs the same. Heres a little history on the motor. I had it laying in my garage for about a year as a parts motor. I...
  4. patrick4266

    1983-70hp-fuel pump diagram?

    I took my fuel pump apart and can't remember exactly where the parts go. I have the new kit and I am, as usual, a little confused. The diagrams I found were not detailed enough. I have the omc manual and it dosn't really cover it either.
  5. patrick4266

    1985-70hp johnson power pack wires

    Can some one please tell me where the wires on a 1985-70hp johnson power pack go. I had the power pack off and am confused on which wire goes where to the coils. These wires are orange with different colored stripes on them. I have tried different combinations but the timing seems to be off...
  6. patrick4266

    70-hp-johnson-spitting out of the bottom carb

    I have a 1985-70-hp johnson that I have been puting back together. I finally got it to where it will start but it is spitting out of the bottom carb big time. I took the carb off and checked the float and it is alright. I have 120 on all 3 on the compression. It is backfiring a little too. Any...
  7. patrick4266

    1985-70hp johnson backfiring

    I have a 1985-70hp johnson thats backfiring a little bit when i try to start it. It will kinda start and then die. Not sure if I got the power pack wire to the coil hooked up right but I've tried every combination. I assume they go to the plugs using the length of the wire as where they should...
  8. patrick4266

    almost burned my garage down

    I was trying to start my motor 1987-70hp johnson. I have it hanging on the back of my garage. A gallon of gas in a anti-freeze jug. I was touching a hot wire to the primer to give it a shot of gas and 'FLAME ON" the whole front of the motor went up in a ball of fire. I looked at it for about a...
  9. patrick4266

    1985-70hp johnson-fuel pump pulse pressure

    I can feel the fuel pump pulse pressure but it dosn't seem like much. Is that normal? I'm having fuel pump problems.
  10. patrick4266

    1985-70hp johnson-firing order

    Can some one tell me which wires from the power pack go to which coil on this motor? I disassembled this powerhead about a year ago and now I am trying to start it. These Powerpack wires are all orange but with different colored stripes. I need to know which one goes to 1-2and 3 coils
  11. patrick4266

    1985-70hp johnson-flywheel nut size?

    I need to buy a socket for a 1985-70hp johnson flywheel nut. Can some one tell me what size it is?
  12. patrick4266

    1985-70hp johnson tilt&trim

    I have the two wire and I am trying to test the tilt on a motor I just bought. How is this grounded? If I hook a hot wire to the blue or green should it go up and down, or do I have to ground out the green while I connect the blue or the other way around? Also is there a release valve so I can...
  13. patrick4266

    old 6 volt starter

    1956-30hp johnson has the old 6 volt starter. Will I burn up this starter using a 12 volt battery?
  14. patrick4266

    1957 johnson

    can some one tell me the year of this? [/IMG][/IMG][/IMG]
  15. patrick4266

    extra oil

    When I add oil to my fuel I always add a little extra just to be on the safe side. My question is how much extra is too much?
  16. patrick4266

    1983-70hp--1985-70-hp carb swap

    I changed the carbs from a 1985-70-hp evinrude to a 1983-70hp johnson, took it to the lake and it runs great. Will this harm the motor?
  17. patrick4266

    1985-70hp johnson

    I just bought a 1985-70hp johnson with a bad lower unit. I have a 1983-70 hp johnson so I want to use the 83 unit on the 85. The problem is the 85 has a vro pump. Any special way to hook this up? does it use a oil tank? Do I even need it on the 85?
  18. patrick4266

    primer solenoid problem?

    1983-70hp johnson. When I pump the bulb and activate the primer it will not squirt fuel. It is kinda of hard to start when cold. Once it starts it works fine. Is that normal? Also I read where Ezeke said you can update to a schrader valve is this much better and worth doing?
  19. patrick4266

    starting a 1987-40hp yamaha with out controls

    Can some one tell me the procdure of trying to start a 1987-40hp yamaha with out controls? I know how to jump the solonoid but how do I connect it so it is getting fire to the plugs?
  20. patrick4266

    1976-70hp johnson tilt&trim

    Does anyone know where I can by a rebuilt kit for the tilt-trim cylinder on a 1976-70hp johnson? Mine is leaking.
Top