Search results

  1. M

    93 jonny 50hp, no spark on top cyl

    Ok, i just put on a brand new coil pack and a brand new power pack. I've regained some spark, the lower cylinder is firing good n strong, however i still dont have any spark on the top cylinder. connections look good throughout. what should i be looking at?
  2. M

    proper propellor selection

    I'm debating buying a new used motor. I know if i do one of the first things it;ll need is a new prop. the old one's fairly worn and it looks too raked to put on a 20 foot pontoon. the boat is a 20 foot pontoon, not much on deck, no furnature slowing me down. Ideal running conditions would...
  3. M

    No spark

    I'm surveying a 1997 johnson 50hp the I2, i guess they made I3s that year too. Anyhow, compression, lower unit checked out. But no spark on the top cylinder. plug wire's fine. So is all it's in need of is a new coil pack? Assuming it's not just some corroded connections. Is there anything...
  4. M

    1997 Johnson 50 Hp

    Hi, I'm the guy who bought the 86 evinrude 60hp with a dead top cylinder (no compression whatsoever), incase anyone remembers that godaweful thread. So i've decided rebuilding that motor isn't worth it. The lower unit and lower midsection housing is pitted and corroded so bad i cant justify...
  5. M

    60 hp on a 20 ft pontoon = 13mph @ wide open???

    Ok, i have a 1986 60 hp evi on a 20 ft fiesta toon. I recently put three carbs on it from a 70 hp evi. It fires up a lot easier then it ever has before (maybe cuz two of the previous carbs had full length cracks in the high speed nozzles). but WTF??? i only can achieve 13 mph on my gps. in my...
  6. M

    Can i put 70hp carbs on my 60hp?

    I have a 1986 evinrude 60 hp and need two carbs for it, no one in town seems to have any carbs for the 60, but my favorite parts bin has a full set of 3 off of an 1986 70 hp. The set of three 70 hp carbs is going to be the same price as buying two brand new 60hp carbs. Is this something i...
  7. M

    Lower unit removal

    I'm looking to replace my impeller on my water pump. The motor is an 86 evinrude 60hp. The only thing holding me back is disconnecting the shift rod at the shift disconnect coupler. It's an intimidating bolt to undo. there's no room to get a socket onto the nut because its too close to the...
  8. M

    Do i have a carb problem?

    I just rebuilt all three carbs on my 1986 60hp Evinrude, the top carb was fine, but the middle carb had a crack down the entire length of the high-speed nozzle (the one that dips down into the bowl). The bottom carb had a crack at each end of the HSN one at the top, visable through the throat...
View older results
Top