Search results

  1. R

    2003 Yamaha 50hp tiller to steering wheel conversions

    I am looking for a new motor for my boat. I have found a 03 50hp 4 stroke motor that the guy says came off a party barge and he converted it to tiller steer. How much does it cost to buy the controls and cables to convert it back?
  2. R

    91 40 horse johnson will only idle after running out of gas

    My brother used my boat and ran it out of gas. The boat had just had the carbs rebuilt with new plugs, and 2 new gas tanks installed and had been running great. It has a new pre-mix fuel pump and the oil injection has been removed. He put gas in it after running out and it would only idle. It...
  3. R

    91 40hp johnson trim switch

    My trim switch will only raise the motor. I have tried the one on the motor and the one on the controls and the both just raise. I tested the switch with a volt meter and the switch is transfering 12 volts to each post, but only the trim raise is working. I can override the switch and...
  4. R

    91 40 hp trim will not raise, the fluid is full.

    I just rebuilt the cylinder and did the lower and raise, refill process about 15 times to remove the air. It was working on my vise when cycling the cylinder up and down using a battery pack. I installed it and now it will not raise the motor without me assisting it while holding the trim...
  5. R

    Trim fill plug stuck on 91 40hp, HELP.

    I pulled my trim apart and replaced o-rings and seals. I put it back together and was going to start the filling and working the air out of the system. I can not get the allen head cap to come out to save my life. I tried penetrating oil, heating the casing, taping on it with a hammer, Allen...
  6. R

    91 johnson 40hp trim cylinder leak and water pump intake screen.

    I got my motor running with the help of ya'll, thanks. I now have a leaking seal on the shaft of my trim cylinder. I can not find a parts kit to re-seal the shaft. I also cant find the plastic screen that covers the inlet of the water intake on the lower unit. Mine is missing and was trying to...
  7. R

    89 johnson 40hp trim and water pump?

    I got my motor running with the help of ya'll, thanks. I now have a leaking seal on the shaft of my trim cylinder. I can not find a parts kit to re-seal the shaft. I also cant find the plastic screen that covers the inlet of the water intake on the lower unit. Mine is missing and was trying to...
  8. R

    92 johnson VRO fuel/oil injection problem

    I have a 92 Johnson that has been sitting for 5-10 years. I replaced the water pump, cleaned the carbs, fuel, and oil systems. It has spark and compression. There is a constant high pitch alarm going off from the shifter. It has oil in the oil tank and I am guessing something is wrong with its...
View older results
Top