Search results

  1. CaneCutter79

    Spark issuse solved, now low compression in one cylinder

    I have an ignition problem and I need to determine if it's a coil going bad or failing power pack? See issue below. My motor ran great last weekend and has been all summer. I got a tune up last fall, new plugs, etc. This morning, the starter gear failed to disengage and made awfull noises...
  2. CaneCutter79

    How to adjust idle? ('79 V4, 85hp)

    Anyone have any instructions or pictures of how to do this? My idle is too low and needs a slight adjustment. I heard it was as simple as turning a screw on the motor. Any thoughts?
  3. CaneCutter79

    Bendix gear slipping, something serious or is this normal?

    I was de-greasing the motor with some "Gunk" degreasing foam around the block and seals yesterday. Before degreasing, I started the motor to check the RPM range. I'm only getting 5,000rpm on the water and I wanted to be sure it was from the load on the boat and the prop/motor setup. I had...
  4. CaneCutter79

    Max. hp rating for 2004 ZX 250 Skeeter bass boat?

    What is the max. horsepower rating for a 2004 Skeeter ZX 250 hull? Someone is selling theirs with a 300hp Vmax and I?m wondering if that is over the horsepower rating. If not, WHOOHOO! :D
  5. CaneCutter79

    Too much cavitation from new prop?

    With the videos below, does this sound like too much caviation? I'm happy with my current motor setup. I just don't want to damage my lower unit, the prop, etc. The prop is a new 17-pitch 3-blade Turbo1 on an 85hp Evinrude with a 15.2 tri-hull fishing boat. I have great lift and the fuel...
  6. CaneCutter79

    Replace my flywheel?

    A) How hard is it to "do-it-yourself" for a guy with decent mechanical experience B) Is my flywheel starting to fail? C) What price range is a new flywheel for my motor (I'm finding $150-$200) D) If it is starting to go, how long do I have before it fails completely? I'd hate to be stranded...
  7. CaneCutter79

    Is this a bad coil?

    When I bought my boat last year, the coil had been damaged from pulling the cowling off the motor. The latch on the cowling cut the wire on top of the coil so the owner soldered it back together. The motor is a 79 Evinrude 85hp V4, model# 85999R. I have seen where my buddy's much larger and...
  8. CaneCutter79

    How do I install a water press. guage?

    I've been advised to install a water pressure guage. After looking at my motor setup and wanting to raise the motor 1-2", this is a must. Motor: Evinrude 1979 85hp V4 Model: 85999R How do I go about installing a water pressure guage? Is it difficult? Any pics or schematics would be awesome.
  9. CaneCutter79

    New prop tested, are these results correct for my motor/setup?

    1. My performance issue was I wanted more bow lift and increased overall top-end speed. I have that the bow lift and a lot of it but I have lost 1mph. 2. Current prop is a Turbo1, 3-blade polished stainless steel(vented) This prop has a good rake and progressive pitch 3. Current prop diameter...
  10. CaneCutter79

    Adjust timing - benefits & drawbacks

    On cars & trucks, you can advance the timing and get better performance but it's harder on the motor and sometimes reduces fuel efficiency. I assume the same applied to marine outboards. What are the benefits of advancing the timing? What are the drawbacks? Shorter life and decrease in fuel...
  11. CaneCutter79

    What is this hole in the side of my boat?

    OK, I'm not totally new to boats and I know boats pretty well. I'm a bit lost on what this hole is on the side of my boat. Its a 79 Cane Cutter modified v-hull. The hole appears to be an intake for an aerator but that aerator is at the very back of the hull. So is the bilge pump. Just below...
  12. CaneCutter79

    What spline do I have?

    Make: Evinrude Model: 85999R HP: 85 Year: 1979 Spline Unknown How do I verify this?:eek:
  13. CaneCutter79

    85hp Evinrude, Water pump-replace or keep?

    I was told I should replace my water pump while doing a tune-up. The former owner cannot remember the last tune-up and suspects it was up to 10yrs ago (or more). Five years ago at the earliest. I know I should replace the water pump but I'm wondering, just how dangerous is it to leave the one...
  14. CaneCutter79

    Cowling paint spec for 1979 Evinrude

    I want to repaint the cowling of my '79 Evinrude 85hp outboard. Does anyone know the exact paint specs/color or how to find it? It's currently blue (see link below) http://rides.webshots.com/photo/2378354520101354590CDTjZo Can I just go to my local OMC authorized dealer and order the paint?
  15. CaneCutter79

    Opinions needed on Turbo props

    I have received recommendations for a new polished SS prop. The manuf. is TURBO. The Turbo 1 is what was recommended to me for my boat based on a boat owner's personal experience with other reputable props. I know that what works for one, doesn't always mean it will work for another person...
  16. CaneCutter79

    How to fill power tilt/trim

    I have a 1979 Evinrude V4 85hp outboard. I think I know how to add power trim fluid to the reservoir but I want to do it right. Do I simply remove the screw, add the fluid into the reservoir/shaft until the fluid starts to come out? Then replace the cap, tilt the motor up and down a full...
  17. CaneCutter79

    Kill switch install for a '79 Evinrude 85hp outboard

    My boat never had a kill-switch installed before and my state requires a kill switch by law. What wires do I need to connect the kill switch to in the controller to install a kill switch? I'm buying a universal kit this afternoon and I was hoping to install it. Any helps is much appreciated!:D
  18. CaneCutter79

    Performance Prop vs. SST Factory

    What is the overall difference between a Raker, Turbo, or other performance prop compared to a factory SST in the same pitch? Lots of bass boat guys tell me the performance prop is a night & day difference compared to a factory Evinrude SST prop. I know you can't really tell the difference in...
  19. CaneCutter79

    How do I wire-up my OMC tachometer?

    I just bought an OMC tachometer for my 1979 Evinrude 85hp V4 outboard. The boat never had a tachometer and I'm going to install one. The pics below show the tachometer and I also have pics of my motor below as well in case that reference is needed. I have a positive lead and negative/ground...
  20. CaneCutter79

    What tachometer will work for my motor?

    1979 Evinrude 85hp V4 Model# 85995R I am looking for an OMC or universal tachometer for my motor. I am seeing something about "5/6/10/12/ and 20 pole". What's that? What do I need to know about my motor before buying a tachometer?
Top