Search results

  1. A

    mariner 220 2.4 l

    Hello on my motor I have 95psi compression but one has 60. Can I run it? Or do I need to re ring it before I start it?
  2. A

    88 mariner 220

    How do I replace the prop shaft seal on a mariner 220hp 2.4L. Its leaking from the prop shaft and has a huge amount of water in it.. Thanks
  3. A

    89? Mariner 220 EFI

    Just got my first bass boat. Has a mariner 220. One cylinder has low compression not super low just about 15-20 below the rest.. I am praying its carbon. I just got it so I have not touched it yet. Should I try to start it and do a decarb? Or just jump to taking it apart? Will I harm...
  4. A

    1970 johnson 115

    Hey guys. I have a 1970 115 which has a pulse pack.. I'm wondering if that pulse pack can be swapped for an amplifier used on the 85hp and 100 hp.. Please help me. Thanks guys.
  5. A

    1960 evinrude 75hp

    I have a starflite 2 and I have no clue how to wire the ignition. Any help??:confused::confused:
  6. A

    1960 evinrude 75hp

    I have a starflite 2 and I need the spark plug wires. Can I get them? Are they possibly the same as a 1970 85 hp? Thanks guys.
  7. A

    Johnson 115 wont turn off with the ignition

    Re: Johnson 115 wont turn off with the ignition This one?? I pulled this from my parts motor.
  8. A

    Johnson 115 wont turn off with the ignition

    I have a 1970 johnson 115 and I have replaced the ignition. But still when I turn the key off the engine keeps running. Any ideas? Thanks
  9. A

    Chrysler 20 and chrysler 9.9

    Hello, I have two chrysler outboards, when I removed the carb bowl on both the float broke! In half! Can I glue it??:embarassed: Any help would be much appreciated! Thanks guys!
  10. A

    I need help please I will love you for ever!

    heres the deal its a 16ft starcraft with a johnson 100 I have a bad right pull. NOTE It does not have the tab to adjust the torque. It does fine to about 25mph but after that the bow goes down and the boat pulls almost flips very scary. the engine is trimmed all the way out and remember at 25+...
  11. A

    HELP lower unit remove

    I have a 66 johnson golden meteor 100hp I have all the bolts off and it wont come off I disconnected the shift wires but do I have to pull them down? If so how do I do that? Thanks
  12. A

    1966 mercruiser 19 or 20 ft fiber form

    how fast should a 19 or 20 ft boat go with a 140 hp mercruiser? thanks
View older results
Top