Search results

  1. S

    Bravo 3 nylon nuts that hold drive to housing.

    I want to replace mine. I assume they are stainless. 7/16 course thread,I think??? home depot had none so I guess a marina would have them right?
  2. S

    shift cable bellows crimp clamp

    Mine is missing. Can I use a regular s/s clamp or should I get a crimp clamp or can I use a zip tie?
  3. S

    outdrive trim gauge inop?

    The gauge always reads up. What should I check for to be the cause of the gauge not working?
  4. S

    Bottom paint & outdrive paint

    All I have to do is touch up some spots from the trailer rollers. I have Interlux Super XL. Is that a good one? What should I do for the outdrive paint?
  5. S

    Bravo 3 exhaust bellows or tube??

    What should i get. Is the tube OK to have the drive all the way up while in the water(while docked) since it's not connected to the drive? not sure if it will hurt anything thats why I'm asking. Does it give more power?
  6. S

    Bravo 3 exhaust bellows or tube?

    What should i get. Is the tube OK to have the drive up while in the water (since it's not connected to the drive? Does it give more power?
  7. S

    fogging MPI engine? (2-cycle in fuel sep. filter)

    How long does it take for the 2-cycle mixture in the fuel sep filter to reach the cylinders. I put it in and ran the engine for about 5 minutes until 6 gallons of antifreeze ran through the engine and it never sputtered or smoked.
  8. S

    1998 Bravo 3 bellows?

    What part #'s do I need? I want to change all 3. Do they come compl w/bellow adhesive? Is it hard to do?
  9. S

    Antifreeze in fresh water tank?

    I put 3 gallons in an empty fresh water tank. I turned on all water systems until pink antifreeze came out. I also bypassed the hot water tank. Should I be allset? The manual says for the vacuflush head to flush 2 gallons thru it. I did about 3/4 of a gallon. Is that enough?
  10. S

    anyone using Quicksilver 25W40 semi synthetic oil?

    I just bought it but I used the regular one prior. Any one like it better?
  11. S

    Anyone use SeaFoam as stabilizer?

    I use it in my ATV and I am going to try it in the boat. They say it's good stuff. I'm just wondering if anyone else uses it. Anyone tried putting it in with your oil? Results?
  12. S

    Bravo 3 Filler Plug?

    My old boat had a bravo1, and the drain/filler plug was behind the prop. Could it be that the bravo 3 filler is the plug on the lower right side? (no prop removal required?)
  13. S

    Bravo 3 DualProp Removal?

    What tools are needed? How do you do it?
  14. S

    7.4L MPI manifolds (rusty underneath)

    All big block manifolds get heavy rust underneath as they don't have the water jackets like the small blocks.(they get hotter) They bolts get really rusty FAST. What is the best way to remove the rusted manifold bolts? Some the heads look almost rounded.
  15. S

    2004 Loadrite roller 25-27' 8,000 lb trailer?

    How wide is the trailer from outer edge of fenders?
  16. S

    Stainless Manifolds/Risers?

    Can you get stainless manifolds/risers? Wouldn't they be better? I know they make them for the high performance boats. I have a 7.4L MPI.
  17. S

    Vacu flush/macerator winterizing

    How do I do it?
  18. S

    Bravo 3 Bellows?

    I want to change all 3. Is it tough? It doesn't sound to hard? Any tips? Should I buy OEM or aftermarket?
  19. S

    Ethanol Fuel storage?

    Store for the winter with a full tank or nearly empty?
  20. S

    What Synthetic Oil to use

    I want to put synthetic oil in the boat. I used to use the Quicksilver regular 25W40. Can I just use Mobil 1?
Top