Search results

  1. supercoolbabe

    1969 Johnson 6 hp

    I have a 1969 Johnson 6 hp that was left upside down in a tank which got water in it. Unfortunely the throttle wont turn the flywheel. Upon further inspection the flywheel was stuck. After removing the head and armature plate and moving it back and forth it has loosened up.The cam, clip, on the...
  2. supercoolbabe

    1969 Johnson 6 hp

    I have a 1969 Johnson 6 hp that was left upside down in a tank which got water in it. Unfortunely the throttle wont turn the flywheel. Upon further inspection the flywheel was stuck. After removing the head and armature plate and moving it back and forth it has loosened up.The cam, clip, on the...
  3. supercoolbabe

    Needle Valve Packing Removal

    I have 1972 Johnson 2 hp. I have been working on as it has begun to have troubles. How do I remove the packing of the high speed needle valve? It is some sort of fiber that seems to be impossible to remove. I was able to get it out of the slow speed valve by taking an hour to scrape out fibers...
  4. supercoolbabe

    Throttle linkage on 6 hp johnson will not move plate

    The top of my 6r69m got wet and now the throttle linkage won't move throttle below flywheel. I have tried blaster to loosen the plates and I got it moving some but is still to hard to move. I have removed the flywheel and magneto. And worked the throttle back and forth but it is still too hard...
  5. supercoolbabe

    what year

    What year would a 4 hp Evinrude Model #4506A be?
  6. supercoolbabe

    Water tube on 1969 6 hp johnson

    Does anyone have a picture of the water tube on a 1969 johnson 6hp short shaft motor? I believe mine is bent out of shape as I cannot connect shift lever and get drive shaft to seat.
  7. supercoolbabe

    water in gearcase

    I have a Johnson 2 hp 1972 50th year anniversery edition. Unfortunately, I trusted someone to use my motor now it has a problem with water in the lower gearcase. I have replaced the oils seals, grommets, impeller, head gasket, brand new bushing housing(gearcase head), o-ring and oil seal on it...
  8. supercoolbabe

    6hp johnson long shaft or short?

    What are the lenghts between the short shaft and the long shaft on a 1970-80 johnson/evinrude 6 hp and can they be changed relatively easy?
  9. supercoolbabe

    Fuel Oil Ratio?

    I think that I have goofed up. I have a 52-54 Johnson 3hp JW-10 that I had been running 50:1 fuel ratio. I just acquired the manual and it says to add 1/2 pint oil to the fuel which I believe makes it a 25:1 fuel ratio. (I didn't know any 2 stroke motor ever ran on anything but 50:1 because I am...
  10. supercoolbabe

    Fuel mixed with Ethanol?

    Is there any way to remove the Ethanol from the fuel that is sold now. I understand it is terrible for older outboard models. My onboard gas tank is aluminum, it can't be replaced.
  11. supercoolbabe

    Repair for Rusty Fuel Tanks

    I have a 50th anniversery (1972) Johnson 2hp that had a rusty gas tank. I was unable to find a replacement so I had to do the next best thing. I bought a product called "Kreem" from the motorcycle store. It is a 3 step treatment. First it etches the rust from the tank. The next part rinses the...
  12. supercoolbabe

    1972 Johnson 50th anniversery

    I have a 1972 two hp johnson sea horse one cylinder that was stored for about 25 years before I inherited it. I serviced it and it ran superb for 3 years. Unfortunately, the fuel tank rusted and the engine would not start. I have cleaned the carborator and gotten a fuel filter but I still need a...
View older results
Top