Search results

  1. 2

    boat sales

    This may go somewhat hand in hand with the "Ebay" thread, but can any of you relate some of your experiences in buying and selling used boats - horsetrading if you will - and is it a viable way to make a little money on the side while doing something you enjoy?
  2. 2

    boat sales

    This may go somewhat hand in hand with the "Ebay" thread, but can any of you relate some of your experiences in buying and selling used boats - horsetrading if you will - and is it a viable way to make a little money on the side while doing something you enjoy?
  3. 2

    thermostat question

    I'm awaiting a manual and not sure if my 1976 Evinrude 70 HP has a thermostat or not?? I never really thought about it until reading some on this site. Water seems to flow out of the top ports pretty much immediately after start up. If anyone can let me know, I would appreciate it as I'll need...
  4. 2

    Inline question

    This question has to do with the actual horsepower of the inlines pre- and post- propshaft ratings: How does the 70s 1500 compare with the later propshaft rated 115 of the 80s overall? Has anyone owned and had experience with both (Clams, I know you're out there)?<br /><br />Thanks for any...
  5. 2

    72 Merc 1150

    Just thought some of you may enjoy looking at this older classic. Looks like it was well taken care of. Not bad for 35 years old. That Tower of Power sure completes the package..<br /><br /> http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31270&item=4516146015&rd=1
  6. 2

    Johnson boat question/outdrive

    Does anyone have any favorable or negative opinions of this boat and outdrive? Would one this old be bound for trouble or could it be a worthwhile project? Did Johnson manufacture a lot of boats or are they rare? Any ideas welcome and appreciated.<br /><br />...
  7. 2

    Johnson boat question/outdrive

    Does anyone have any favorable or negative opinions of this boat and outdrive? Would one this old be bound for trouble or could it be a worthwhile project? Did Johnson manufacture a lot of boats or are they rare? Any ideas welcome and appreciated.<br /><br />...
  8. 2

    tilt and trim ?

    I have an inline 1500 and am wondering if it is OK to store the motor over the winter tilted down to prevent moisture from getting into the propshaft or lower unit area and freezing? Specifically, is storing it in a down postion for an extended period of time placing any undue strain on the...
  9. 2

    Penzoil synthetic blend?

    Honestly curious here and not in any way attempting to be a provocateur, but would anyone out there be willing to say that Penzoil synthetic blend at Wal Mart is better than Quicksilver Mercury oil in addition to being cheaper? I've been using it in my recently rebuilt Mercury Inline 1500...
  10. 2

    prop ID question - Michigan

    Hello,<br /><br />I just purchased what I thought to be a 15 P prop off ebay that was supposed to fit an Inline 6. The prop is Michigan # 031041. It has 15 splines but the blades are too big and swept back and as a result cannot clear the trim tab. Can anyone tell me from the numbers what...
  11. 2

    Evinrude Starflite 90 - What year?

    Hello,<br /><br />I have come into possession of this motor and am trying to find out the year (I'm guessing mid 60's). <br /><br />Model # : 90593C<br />Ser. # : E03749<br /><br />Any replies would be greatly appreciated.<br /><br />Re: the motor: It seems to be locked up and I will try and...
  12. 2

    inflation question

    Just curious, with outboards being sold at seemingly exorbitant prices today, how much did a Merc Inline 1500 list for in, say, 1975? I'm not quite old enough to remember, but am curious. Any replies are appreciated.
  13. 2

    Inline 6 vent jet ?

    Hello,<br /><br />What is the final word on the 3 vent jets on the 3 bowls of a mid 70s inline 6 1500: Is it best to remove them altogether and why or why not? I remember reading on the board sometime back that it is best to just remove them and wanted to confirm again before I do it?? Thanks.
  14. 2

    Opinion

    I was talking to 2 guys in my area who run a repair shop that services Johnsons and Mercurys.<br />They made several observations that I would like to throw out here. I had taken a LU in off a mid 70s 1500, and as soon as they found out that I had an Inline 6, they proceeded to tell me that...
  15. 2

    idle mixture/plug question

    Hello, I have a 74 150 and have noticed that, with all three idle mixture screws set at anywhere from 2-3 turns out, the top two plugs look normal and the bottom 4 look flooded or too rich - virtually clean. The cylinders have verifiable spark. And when disconnecting each one there is a...
  16. 2

    Help! Ignition troubles..

    As the title implies, I am almost at my wit's end.<br />I have a 74 1500 and I recently bought a spark plug wire kit from NAPA and fabricated the wires. After reinspecting and redoing the crimps, I still have arcing at the plug boots and at intermittent points from the cap to the plug ends...
  17. 2

    spark plug wire arcing on 1500

    Greetings,<br />I replaced the spark plug wires on my 74 1500 and noticed when running the motor at night that there is some arcing from several of the wires behind the throttle control lever on the motor and then occasionally from wire to wire as they feed into the distributor cap. How or why...
  18. 2

    spark plug wires

    I decided to change out the wires on my 74 150 and went to Napa to look for some aftermarket wires. They sell a kit through Sierra with 25 ft of wire and required fittings ($29.99). My question is does anyone have any experience with using a kit line this and will I need anything beyond a wire...
  19. 2

    performance question

    I have a 74 150 HP on a 73 18 ft. Glastron. It has a 15 pitch prop that turns 5400 RPM at WOT. I'm not sure of the boat's weight, but is doesn't seem obscenely heavy. I have a Hydrofoil also and am hitting about 36 MPH. The cavitation plate is even with the bottom of the transom. The...
  20. 2

    SeaFoam

    I just wanted to let everyone know that some of the Advance Auto Parts stores are now carrying SeaFoam--at least that's what I've noticed here in SC. I asked a manager about it and he indicated that there have been a lot of inquiries about stocking it. They are selling it for about $5.00 a can...
Top