Search results

  1. S

    Cranks-doesn't start

    65 hspr. Evinrude-been through the mill with this engine. Have come to the conclusion that the problem exist in the control box, where the ignition switch and the safety switches are. The wiring on the two small bolts on the solonoid goes to each one of these in the box. The safety switch has...
  2. S

    No high speed

    94 Evirude 30 hsp. Runs wide open them alarm goes off. Pumping water fine. Still runs but won't go fast. Put in reverse, alarm stops , but won't go fast. Is the alarm preventing the higher speed. What's the steps to check out what's going on.<br /> Thanks Skip
  3. S

    No Spark

    Have a 65 Hspr 1972 Evinrude Electric shift. Replaced the solonoid and the power pack, and the two wires on the side of the solonoid, one going to the key, the other to the safety switch in the control box where it shifts. Still no spark. What's the next step to further check out the problem...
  4. S

    Starting Problem

    Have a 1972 65 Hspr. Evinrude. Replaced the solonoid, and the two wires going to the small terminal broke off, due to the age of the motor. Traced the wires, one went to the safety switch, the other to the ignition and replaced them. Engine cranks fine but won't start. Mechanic is leading me...
  5. S

    power pack

    1972 65 hsp. Evinrude. Does it have a power pack or are the points under the flywheel. If it has a power pack is there a way to check if it is defective.<br /><br /> Thanks <br /> Skip
  6. S

    Checking current or voltage

    What is the best way to check out the coil, and power pack on my 1972 65 Hsp. Evirude. Cranks well but does not start at all. Seems to be getting gas.<br /><br /> Thanks<br /> Skip
  7. S

    Voltage

    1972 65 Hspr. Electric shift. Need a method to check voltage from battery to solonoid to ignition switch. Have a voltage meter. One wire goes from one of the small bolts to the ignition. The other small bolt on the side goes the electic shift. Is the solonoid grounded by the strap holding it to...
  8. S

    Safety Switch

    Have an old 72 65 hspr evinrude, and believe the safety switch is a problem as it won't start. Can the wires be removed that go back to the ignition switch from the safety switch without causing a problem. If it starts, another safety switch can be installed<br />...
  9. S

    Ignition Switch

    HAVE A 65 Hspr. 1972 Evinrude, and need to know what is the best way to check the wires going to the ignition switch. There are also wires going into the switch from the safety switch. Solonoid is okay, and I suspect the problem is in these switches. How can the power be checked coming back from...
  10. S

    Ignition Switch

    HAVE A 65 Hspr. 1972 Evinrude, and need to know what is the best way to check the wires going to the ignition switch. There are also wires going into the switch from the safety switch. Solonoid is okay, and I suspect the problem is in these switches. How can the power be checked coming back from...
  11. S

    Solonoids

    Can someone explain the wiring going to the solonoid, and the method to check each one. How do you go back to the source of each wire to check it out, especially the two smaller ones on the side of the solonoid.<br /> Thanks<br /> Skip
  12. S

    Montgomery Ward 25 Hsp.

    Have an older 25 Hsp. Wards motor in good condition, but the lower unit is bad. The model number is VWB 52025 and the serial number is 47X20161. Anyone know what year it is, and if there is anyplace a lower unit can be purchased.<br /><br /> Thanks,<br />...
  13. S

    Evinrude Starter

    1972 65Hsp. Evinrude. Want to take electric starter off of engine as bendix seems to keep running after it disengages. See the two bolts on the side that have to be removed. What else is there as it won't come off after they're removed.<br /><br /> Thanks,<br />...
  14. S

    1972 65hspr 3 cylinder Evinrude

    Engine runs fine, but there's no way to look at it and see if it's pumping water. It's not overheating so everything must be fine, but shouldn't there be a way to check it out.<br /><br /> Thanks,<br /> Skip
  15. S

    Evinrude 65 hsp. 1972

    Motor turns over when trying to start, but not enough to start. Can positive jumper be attached to starter motor, negative to ground, to check starter. Can a jumper cable be used to bypass solonoid. Connections are all clean, battery is charged. Started a couple times about two weeks ago and...
  16. S

    Evinrude 65 hsp. 1972

    Motor turns over when trying to start, but not enough to start. Can positive jumper be attached to starter motor, negative to ground, to check starter. Can a jumper cable be used to bypass solonoid. Connections are all clean, battery is charged. Started a couple times about two weeks ago and...
View older results
Top