Search results

  1. H

    Boat Prop Repair

    I have a 105 chrysler and I have a prop i would like to fix, I have a tig welder, i am curious of how i can make all three blades symetrical???
  2. H

    time to tune it in!

    I have a 1974 105 chrysler. I have it running to wear its reliable and starts every time. I am wondering how to set the distributor to were its perfectly in sync with the carbs? also it will occasionally pop out of gear i have adjusted the locknut thing on the rod that runs into the lower end. I...
  3. H

    How to put a lower end back on

    A buddy has a 90hp chrysler motor. The lower end was removed to put in a new impeller before he bought it and it never got put back together. We tried a few times to put it back together with no luck. Any suggestions?
  4. H

    Trying my hand at prop repair

    I have a 13x19 chrysler aluminum boat prop. It was given to me by a friend and the bottom of it was badly bent like it struck a log. so i used my oxygen acetylene torch to heat it and used an anvil and ball peen hammer to straighten its. I measured and felt it to match it up. It looks 100%...
  5. H

    Normal or Does something need adjusted?

    So with two people my 105 gets my 16 foot boat on plane pretty fast. But with 3 more people it gets on plane really slow but once its up it does fine its just taking off is slow. I was thinking it may be normal because an extra 300-500 lbs could be alot for it. Is it possible points not being...
  6. H

    Prop wanted!

    I need a used 13 by 19 prop for a 105 chrysler. In my area its way to pricey to have mine redone and also the prop guys will sometimes not even touch one as bad as mine. So i found one for like 70 bucks that looks good on eBay. Does anyone no of places i can send my prop for a redew that is less...
  7. H

    Weird problem!

    So for some reason the points i orderd from iboats wouldnt work on my 105 so i put my ford ones back in. after that it started and ran in the driveway. when i got down to the lake it would not even get on plane and would only gain some speed if i left it in a particular place on the throttle. Im...
  8. H

    Top speed Help

    I have a 1974 105hp chrysler i put on a 16 foot v170 rinker. Right now my top speed is about 37-38 mph. Is that about right for my set up??? How can i make it hit that magic 40mph mark???
  9. H

    Where to find parts??

    Im looking for a new distributor cap and rotor and i can not seem to find any sites that sell those. My 105 engine is having spark issues and the two things i havnt replaced are cap and rotor and want to be sure to have new parts because i dont know if i should trust parts that are 38 years old!
  10. H

    Water in the gas!

    I have a 1990 16 foot rinker built that i put my 1974 105 Chrysler on. The built in fuel tank had gas in it when i bought the boat so i siphoned it out using the fuel line. Then i put a fresh 3 gallons in and later another 6 gallons. Now im working on getting my motor back in good working order...
  11. H

    Car coil performance

    I have converted my chrysler 105 to a automotive coil and points. Will i be able to tell a difference from the origional system to car coil? will it not perform the same?
  12. H

    How to time a 105 chrysler

    I have a 105 hp chrysler that i need to put in time. Im not sure how to do it exactly. what i have done is put #1 piston up and line the distributor cap up with the #1 plug wire.
  13. H

    I am puzzled! what am i missing?

    i Have a 1974 chrysler 105 hp. To start with i converted it to 12volt coil, changed the wires, plugs, and the coil is new and new points. I unhooked the timing belt and spend the distributer with the key on and all 4 plugs are firing. It has an even 120 psi over all the cylinders. I took the...
  14. H

    Fuel and Spark but wont run! Help please!!

    I have a 105 Chrysler that is getting good spark, Is 100% in time, Is getting fuel but will only pop once every so often and not run. I have replaced the spark plugs and checked all the connections, every plug is firing. Ive checked the floats on the carbs and made sure the gas was fresh in the...
  15. H

    Power Tilt and Trim leak down!

    I have a 105 chrysler with apower tilt and trim unit from a 1990 85 hp force. It goes up and down fine but it slowly leaks down if left in up. Both the power tilt and trim slowly leak down. What are some causes of this??? how can it be fixed?? Any advice is welcome and appreciated
  16. H

    How to tell age of a chrysler

    I have a 105 hp chrysler and Im not sure how to tell its age?
  17. H

    Coil gets hot when key is on

    I have a chrysler 105 hp that i converted to coil and eliminated the cd box. The issue is even when the key is off the car coil gets hot. what is causing this how do i fix it?? any help is appreciated!
View older results
Top