Search results

  1. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    So I found the issue but I do not know how to fix it? The cam that controls the timing with the spring under it goes too far down the shaft causing the flywheel to sit too low and making the flywheel drag on the mag plate which turns it. Do I need to replace the cam?
  2. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    As far as I can tell they are. I will double check them tomorrow. The throttle linkage is for sure.
  3. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    I also placed the old coils back on and it's doing the same thing. Is there something that has to be adjusted? So strange to me.
  4. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    I used the screws from the old coils.
  5. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    Update I used the locating ring and moved the coils in as far as I can but same issue is occurring. Flywheel sticking and pulling the mag plate.
  6. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    Checked the flywheel yesterday and its not warped. I also checked the coils and it appears the back of the coils that is brand new is rubbing on the flywheel when spinning which is what is causing the flywheel to stick and causing the mag plate to rotate. I ordered a locating ring and just got...
  7. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    Most definitely my technique then. I will check the flywheel and fingers crossed its not that!
  8. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    Great tip! I did use the jaw style puller as the the puller that is recommended to use kept snapping the bolts holding it down to the flywheel. I'll try all the suggestions and update once I have tried them.
  9. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    So the mounting plate is supposed to be loose and move around freely?
  10. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    Also, when looking down at the mounting ring I noticed there is a notch in it kinda like the notch the flywheel connects to the crankshaft with. I do not see anything that is supposed to sit in?
  11. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    I did not remove any mounting rings. There is one that is in there but I did not take it out. It is very loose though and moves easily.
  12. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    No its not loose. I did remove the Mag plate to change the plug wires but its not loose. There is a ring that sits over the camshaft the rotates very easily that the mag plates bolts onto. Is it supposed to move around very easily?
  13. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    I lined up the coils with the 'Machined' piece of metal. Maybe they need to go in further than the machined surface? Thanks for the reply.
  14. callious

    1963 10hp Johnson QD-24 Flywheel rotating the mag plate

    I need some help with this. I took the flywheel off to replace the coils and spark plug wires. I have not replaced the condensers or points but when I go to put the flywheel back on I get it on but it turns the throttle below it. This did not happen before I pulled it off. Anyone ever have this...
  15. callious

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    Here are the pictures of the carb. I tried it again and it's just flooding out the engine.
  16. callious

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    Nope the kit does not come with the seat and gasket, only the needle valve which I did replace.
  17. callious

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    Here are the pictures from the manual showing the gasket
  18. callious

    1993 Sears Gamefisher Running for about 1 or 2 minutes then dies.

    Thanks for the links! From the diagram I have on my Carb there is a gasket that sits just below the seat. I went and bought a gasket material and hopefully I can make a small enough gasket to fit in there.
  19. callious

    9.9 Gamefisher Carb replacement

    Thanks for the replies. The Carb currently on there has bad seat which is no longer a part available that I can find. Unless as you said I can look in salvage yards for one.
  20. callious

    9.9 Gamefisher Carb replacement

    Here are the pictures of the Carb.
Top