Search results

  1. T

    1995 Larson 214 LXI... Floor and stringers

    Got my wobble wheel assemblies tore apart and repainted. Reassembled them with new galvanized carriage bolts and then put them back on the trailer. Also got my new wheels/tires from the UPS man today. This 20+ year old trailer is gonna be good as new. Today the UPS man is going to bring my...
  2. T

    1995 Larson 214 LXI... Floor and stringers

    Trailer nearly done.... Just have to paint wobble roller brackets. I used Valspar Oil based tractor type paint with some activator and rolled it most places and then used some gloss black spray paint on some of the tighter areas. Might order some new fancy wheels too as my painted original...
  3. T

    1995 Larson 214 LXI... Floor and stringers

    Shoreland'r trailer getting some love today. Hopefully will be done by tomorrow and boat can go back on it. Disassembled and scuff sand then painting black.
  4. T

    1995 Larson 214 LXI... Floor and stringers

    There is my MiniMax "ultralight" that I built way back in '94 hanging from the ceiling. Also have a 90% done 90% to go DR107 One Design aerobatic plane in there.... Don't know if I will ever finish it. Lol
  5. T

    1995 Larson 214 LXI... Floor and stringers

  6. T

    1995 Larson 214 LXI... Floor and stringers

    Got my stainless cup holders.... They fit perfect. Look much nicer than the stained white originals.
  7. T

    1995 Larson 214 LXI... Floor and stringers

    I pack a bunch of stuff (tubes, life jackets, canvas etc) in the back storage area under my sundeck. I never liked having stuff sitting on top of my dirty battery and trim pump. I found a cheap black plastic milkcrate at Walmart and I cut it a bit to straddle my cables/hoses. It just sits on...
  8. T

    1995 Larson 214 LXI... Floor and stringers

    I ordered these. I should get them by Friday and will report back how they fit. It is a set of 10 for just under $40 shipped.
  9. T

    1995 Larson 214 LXI... Floor and stringers

    Seats are in.... Still need to carpet the bow.... Couple days and this thing might get wet.
  10. T

    1995 Larson 214 LXI... Floor and stringers

    Installed battery and dressed up wiring this weekend and started installing interior..... After getting everything positioned correctly I will predrill and install screws in all holes going into new decking then disassemble and counter-bore holes then reassemble with screws potted in epoxy. I...
  11. T

    1995 Larson 214 LXI... Floor and stringers

    Carpet is finally installed!!!!! Wont be long now!
  12. T

    1995 Larson 214 LXI... Floor and stringers

    Was a little concerned that my fuel tank might not fit after replacing the stringer.... No worries, went in nice and snug with new foam tape applied. Also installed a new trim pump reservoir as the old one leaked. Hopefully will get a bunch more done this holiday weekend.
  13. T

    1995 Larson 214 LXI... Floor and stringers

    Painted the bilge, ski locker and the entire floor with some left over Nason Fulthane using a roller. About 3 coats. Carpet also showed up today on a FedEx truck! Probably will carpet the front half but leave the rear under seat storage areas bare paint.
  14. T

    1995 Larson 214 LXI... Floor and stringers

    Big milestone for me last night.... Finally was able to completely wash out all of the white powder/dust that was clinging to every square inch of the boat for the last several months. I also sprayed the side carpet with Resolve carpet cleaner and my power washer made it look nearly new again...
  15. T

    1995 Larson 214 LXI... Floor and stringers

    Fiberglass at bow eye was wallowed out a bit and needed some strengthening. First I made a new outer plate out of stainless steel to cover the chipped gelcoat, then I taped it in place over the holes being careful to seal the edges. I then used my fingers to glop some raw epoxy from the inside...
  16. T

    1995 Larson 214 LXI... Floor and stringers

    Pulled old carpet off then sanded and glassed fuel tank and ski locker covers this morning. Beefing up glass at bow eye this afternoon and then I think I will be ready to vacuum and then wash/rinse down entire boat interior in preparation for paint and reassembly. The end is in sight...
  17. T

    1995 Larson 214 LXI... Floor and stringers

    This thing is rock solid now. Also trimmed overhanging deck glass then applied last coat of epoxy to top of stringers and deck joint. She is water tight now!
  18. T

    1995 Larson 214 LXI... Floor and stringers

    Drilled pilot holes thru new 3/4" riser and about half way into 1/2" deck. Ran screws in with base installed to cut threads. Removed screws and drilled oversize hole about 5/8 deep then wetted out holes and reinstalled silicone sprayed screws to final depth. Filled oversized hole around screw...
  19. T

    1995 Larson 214 LXI... Floor and stringers

    Both sides glassed now with one 10 oz layer and epoxy. I also have one layer of 17 oz and then one layer of 10 oz covering the seat bases. I think it came out nice and basically everything is sealed now from a couple inches up on the hull sides all the way down to the lockers and bilge.
  20. T

    1995 Larson 214 LXI... Floor and stringers

    Sunday instead of working on boat as planned, I ended up having to repair my race car after losing half of the front nose and the right fender in a self inflicted crash (still managed to finish 5th out of 18 cars lol). Last night I was able to finally put down some 10 oz glass and epoxy on...
Top