Search results

  1. S

    2000 5.7 gsi fuel pump relay problem

    hi gang, I have a 2000 5.7 gsi that is having issues with the fuel pump relay...A few weeks ago i brought the boat home to clean it up for this years fishing adventures... I ran the boat on the muffs with no issue. Today Im finishing up a few details and I attempt to start it on the muffs and...
  2. S

    Fuel Cell Penta 5.0PEFS and TBI injectors

    go to your local auto parts store and tell them you want 2 injectors for a 1997 chevy 1500...
  3. S

    ECM Swap ? Plug and play ???

    have you contacted bob at mefiburn.com?
  4. S

    Volvo Penta overheating issues

    I had the exact same problem a few years ago after i installed a new engine. I chased it in circles for some time. My solution which may not be perfect for everyone one has worked ever since. I can't find the exact diagram but hopefully my description may lead you to a solution. if you follow...
  5. S

    5.7 gsi no fuel from injectors

    So yesterday I was out boat ran normal throwout the day. on the way in the seas were less than fun so i was traveling about 19-2000 rpm... as i increased the throttle the motor seemed to pop/backfire and die. it started and i was able to advance to 19-2000 rpm again. as i attempted to increase...
  6. S

    Looking for poly fuel tank parts

    I have a skyline industries 134 gal poly tank. im trying to source gaskets for the sender and the ports. model: 2B134A-B Material: XLPE Thickness: .275 Anyone know where i can find what im looking for?
  7. S

    2000 5.7 psi pwtr no fuel to injectors

    i have a vp 5.7 gsi pwtr that is not getting fuel to the injectors. one of my many q's are what could cause this? when i turn the key to the on position my fuel pumps primes for 3 sec. when i crank the key the motor turns over but no fuel flows from my tbi..could this be a faulty ignition...
  8. S

    Fuel pressure adaptor

    i need to test my fuel pressure on a 5.7 vp. Tbi does anyone have a part # or link to the fitting that attaches to the schrader valve?
  9. S

    2000 5.7 gsi pwtr possibly overheat gremlin.

    So last year i repowered. 5.7 psi pwtr. I was unable to make any trips as i have been chasing an overheat per my gauge. Things I've done. I have replaced every hose. New Thermostat. sea water pump. New threw transom fitting. new outdrive hoses. VP sx-M. New seals in the lower. I installed...
  10. S

    2000 5.7 gsi pwtr repower overheat help

    so today I had a planned fishing trip.. drop the boat in fire it up with a bump of the key and all is well.. I start to motor out just in gear.. maybe 5 knots and I see the temp climb... gets a lil got so I shut it down and drop anchor while it’s cooling down I pull the brand new impeller...
  11. S

    2000 5.7 gsi problem

    hi guys, So I rebuilt the top end on my 5.7 gsi. I put everything back together and when i went to fire the motor to adjust timing my fuel pumps didn't click on for 2 sec like they normally do prior to the rebuild.. So digging into the fuel pump relay I think I have found some problems...
  12. S

    VP 5.7 gsipwtr riser starboard getting hot

    Gents I have lurking for some time absorbing all of the great advice but now i have a problem i need help with. I have a 2000 sea swirl striper 2600 with a VP 5.7 gsipwtr. My problem is that my starboard riser is getting hot. Back story is the boat was dry stored for about 7 years before i took...
Top