Search results

  1. dkonrai

    thanks guys!! 1986 50 hp

    want to thank frank and jerry for the much needed help. i have this 1986 50hp motor that i have been tinkering with all summer. rebuilt the carb, and fuel pump. new hoses (alot of them) new coils, points, plugs, wires. adjusted the linkages. checked the compression again, its still 135 pounds...
  2. dkonrai

    1986 force 50hp timing, how to?? confused

    i received my chrysler outboard service manual. i cant seem to make any sense about how to time the motor. it seems i need a timing tool and install it in the number 1 cylinder??? the alternate is to pull the flywheel and check the timing with a light off the points. there is no reference at all...
  3. dkonrai

    1986 50 hp stator and flywheel swap

    can i safely use the stator and flywheel off a 1979 45hp motor on a 1986 50? part numbers are the same, and it fits, but i want to make sure. is this ok? i bent the flywheel teeth off my old flywheel, so i had to use the flywheel and stator off a 1979 parts motor. will my voltage be ok? can i...
  4. dkonrai

    1986 50hp coils.can i use cdi on points?

    1986 50 hp. i have points and need a coil. can i use the coils off a cdi unit? like the blue coils? or do i need to stick with the stocker replacements? can i use any two wire coils?
  5. dkonrai

    86 50 hp point gap, and stator questions

    i have a 50 hp force, 1986. its got coils and points. i finally got the flywheel off, i had to buy a hydrylic puller, and modify it. at first attempt, i pulled the gear teeth from the flywheel. i then had a buddy modify the jaws (welded some tabs on the jaws) and finally got the darn thing off...
  6. dkonrai

    us marine model 507a64/50 hp info?

    i am trying to figure out, if this motor has points? or cdi? i cant get the darn flywheel off. my mechanic is telling me i have no spark on the top cylinder and a bad coil. i have the manual, but it is a little vauge, so im hoping someone out there can confirm on the points, what year is the...
  7. dkonrai

    86 50hp, 14 foot, seems slow

    1986 force 50, on a bayliner 14 foot. rebuilt carb, new fuel lines, bulb, fuel pump, coils, plugs. now the problem, i changed the prop, went with a flatter pitch and now it seems slow. i went out on a windy day and it seemed slow to get on plane. the gps showed a top speed of 18mph. i noticed...
  8. dkonrai

    86 50hp force fuel pump check valve removal

    the fuel pump for the force 50, do i need to remove the check valves? the diaphram is bad, and i cant seem to remove two of the three check valves. do i really need to remove them? dont seem to be damaged. dino
  9. dkonrai

    86_force 50, and bayliner electric question

    this 86 bayliner has a 50hp force. question, on the battery leads, there is a large cable, goes to the starter. then there is a red lead that goes to the motor, on the positive side of the electric screw box. where does the orange, generator wire go? i see it at the switch. wondering if this...
  10. dkonrai

    85 50hp, soft ball and no power

    my 86 50, runs and starts ok. last time i went out it ran great. took it out sunday, and i had a soft ball, and no upper rpm power. started ok, idles and trolls fine, but when i go to wot, or 75% it seems to lack power. it would not get onto plane. i did attach a bow mounted trolling motor, but...
  11. dkonrai

    86 50hp force and 79 45hp chry same engine?

    i have a 1986, force 50hp. wondering if a 79, chrysler 45 are the same motors? i have a chance of buying one complete for 160 bucks, but dont know if they are the same motors? looks the same, same coils, and covers. trying to locate coils, and the bolt that holds the motor up. figured it was...
  12. dkonrai

    seloc manuals ok?

    how are the seloc manuals? i have a 86 50hp and looking for a good manual thanks dino
  13. dkonrai

    1986 50hp rectifier voltage? too low?

    my 86' 50 hp, wasnt charging the battery. so i checked the battery cables, and i had only 12 volts, when i revved the engine there still was no change in voltage. changed the rectifier, and now it reads 12.4 volts at idle. when i give it some gas, i get 12.7 volts. i have not checked it on the...
  14. dkonrai

    86 force coils, can i retro new style? compression?

    i just found out the new replacement coils are 141 each. can i retro the new style coils to fit? i have 130 pounds of compression on both cylinders, what were these new? is the compression high or low? thanks
  15. dkonrai

    86 force 50 coils where to get them? or??

    my motor has these small diameter coils that i cant locate. can i use the current small style and just modify them to fit? dino
  16. dkonrai

    86 force 50 pictures and questions

    here is the motor i just got with my bayliner. its a 86 50hp. question is this the rectifier? coils look ok? it runs pretty good, but low idle its a little off. will try and clean the carbs. whats the clear tubing for? i know its the outlet of the thermostat, but what is the purpose? i plan...
  17. dkonrai

    86 50hp bad battery?

    test rode the bayliner today, and it ran great. smooth at idle, and good power. question the motor died late in the day (steped on the fuel hose) and it seemed the battery drained. how can u tell if the alternater is producing electricity? or is the force different, and doesnt do this recharge...
  18. dkonrai

    how hot is it ok for the heads?

    force 50 hp engine, i have a surface temp gun, and i shot the head for temp and it reads 180-190 is this too hot? thanks dino
  19. dkonrai

    what year is my motor, tell tale?

    ok i know im not supposed to list more than one question, but here it goes. i bought a bayliner, 14 footer, and it has a 50 force. i think it is a 88, but the numbers model 507x6a serial 1566. the other question, is there a tell tale? i read the post on how to install one, but the guy i bought...
  20. dkonrai

    merc 1986 4.5 shifting problems

    i bought a merc 1986, 4.5 motor. it had issues, like dried gaskets. i took the motor apart, replaced all the gaskets (thanks iboat) and now i cant seem to get the shifter to work right. i have forward and neutral but cannot get into reverse. the shifter worked fine before i regasketed the motor...
Top