Search results

  1. J

    Housing

    Hello question, what would you consider the outdrive housing?
  2. J

    Help transom leaking

    Alright so problem solved the hose clamp was actually to far up the hose so I put a second which seemed to have fixed it
  3. J

    Help transom leaking

    It is right where that hose connects to the outdrive
  4. J

    Help transom leaking

    I am not doing it my question is could the bellows be causing that
  5. J

    Help transom leaking

    Just checking to see if anyone has any thought if bellows can leak here. I am having them done next week just hoping that could solve the problem
  6. J

    Fuel return

    Yes I’m hoping to get there tomo. I think it is the tank as even once I use the hand pump the fuel doesn’t continue to flow through the line. Last night I siphoned almost a gallon through and as soon as u stop with the hand siphon the fuel stops flowing and recedes further back to the tank
  7. J

    Fuel return

    great thank you I will not do it
  8. J

    Fuel return

    Yea I have no squeeze bulbs. Another question is once I have the anti siphon valve off can I shoot compressed air through the hoses and into the tank to clean out?
  9. J

    Fuel return

    I actually have two engines this is the one that has the issue though the other is fine
  10. J

    Fuel return

    So this is what I’m looking at on this engine it is a pain to access so pictures are not the greatest. I’m assuming the disconnected line is an old one that was never removed but I still can not get this fuel line to prime. I can pull fuel through it with a hand siphon but it doesn’t actually...
  11. J

    Help transom leaking

    Hi all good advice. I tracked my leak to where this raw water line meets the transom. It’s hard to get to but I’m wondering if it is just loose or something
  12. J

    Maxwell 500

    I will be there later today and post some updates. I did previously disconnect the helm switch and wired it directly to the solenoid and it still only worked in one direction even if I reversed the terminals. The only way I have seen the motor pull up the anchor is attaching the F1 and F2 cables...
  13. J

    Fuel return

    The hose that I saw is actually bigger than the fuel line I will take pictures and post a bit later. Happy Memorial Day and safe boating
  14. J

    Fuel return

    Hi guys thank you so much I will be heading down to the boat later to investigate
  15. J

    Maxwell 500

    So I found a different part number for the reverse solenoid from Maxwell to replace p100711 and it is sp5102 which has the ground. The anchor continues to go only down but not up. Once again if I jump the f1 and f2 directly to power the anchor will go up and down. Does the boat need both engines...
  16. J

    Fuel return

    Sorry so I bought this boat and the fuel lines were disconnected and tanks were dry in preparation for storage. The engine is a Volvo penta gxi/e 5.0 3869255. I hooked the smaller of two hoses to the fuel pump and primed it. It ran for a little but stalled out from loosing prime. There is...
  17. J

    Fuel return

    Should Volvo gxi have a fuel return line to the tank and where would it connect to the engine
  18. J

    Help transom leaking

    It’s hard to tell where it is leaking from
  19. J

    Help transom leaking

    I’m going to have someone work on it but he is saying could be bellows
Top