Search results

  1. J

    livewell pump

    I bought a used tracker and replaced the livewell pump cause the old one was cracke on what about 500gph I found a heck of deal on an 800 gph pump but am not worried that it won't drain fast enough through the overflow and will spill out of the livewell. There is a spray head that bends 90...
  2. J

    livewell pump

    I put in a new live well pump in my 98 bass tracker. The switch has on and auto. When I switch it on it runs continuously however when i swtich it to auto the pump revs up and down and the light blinks on the switch and makes a clicking sound. Why is that? I haven't had it in the water just...
  3. J

    speedometer

    I bought a used bought and have been getting it ready for the water. The speedometer lights up but when i spin the paddle wheel the needle does not move any ideas how to fix it..
  4. J

    polishing bass tracker boat

    I tried a to polish a small area on my bass tracker boat with mothers aluminum polish worked great lots of black came off but i read not to use it on anodized aluminum. Since so much black came off does that mean it is not anodized. It says not to use it on anodized aluminum guess my question...
  5. J

    throttle question

    I just bought a new boat to me a 98 bass tracker pro team 175 it will shift into forward just fine when the motor is not running but will not shift into reverse I didn't know if this was normal with the boat not running. I just had the water pump replaced and was afraid someone did something wrong.
  6. J

    transom saver

    Any one know where i can get the rubber v-block for my transom saver.
  7. J

    transom drain plug

    Where can i get a transom drain plug for a 98 bass tracker pro team 175. I think it is a 3/4 threded plug. The threads are like pipe threads not the bigger threads on some of the plugs i have gotten any help would be appreciated.
  8. J

    thru hull fitting

    What is an easy way to remove a hose from a thru hull barbed fitting where not much room is a available. Can i put a little grease on the fitting to make it easier to get on. And how far should they be pushed on so taht they would leak with a hose clamp on them.
  9. J

    thru hull

    I installed a new thru hull fitting for my livewell drain. It is in a very tight spot and I used a thru hull fitting that would accomodate a 1 1/4 or 1 1/8 inch hose i could only slid in the the fitting about an inch becasue there was on room to work and my hose must have been a 1 1/8 inch...
  10. J

    sealing a thru-hull

    What should i use to seal plastic thru-hull fitting in an aluminum bass boat. I have heard 5200 and 4200 what should i use.
  11. J

    live well pump

    I have a 98 bass tracker and need to replace the aerator pump however it is attached to valve that is controlled by a wire that is connceted to a switch that say fill and empty how is the pump attached to this valve. Is it just screwed in. The mut and valve have a piece of aluminun between...
  12. J

    keel guard

    Will a keel guard work on my 98 bass tracker pro team 175
  13. J

    bilge vs. livewell pump

    I bought a 98 bass tracker and it has two pumps mounted to the transom in the bilge. Both are rule pumps round red white and blue ones. They look exactly the same except one says bilge and one says eithr livewell or aerator. I have found replacement for the bilge but not the other one. Where...
  14. J

    thur hull fitting on 98 bass tracker pro team 175

    I need to replace the thru hull fitting on the live well intake on my bass tracker I am not sure it is the original one because there are three screws around the fitting that do not hold anything on the boat but go all the way thru the boat any ideas what these were orinally for.
  15. J

    thru hull fittings

    The livewell intake thru-hull fitting on my 98 bass tracker is leaking so I am replaceing the thru hull fitting and resealing it my question is there are three screws around the thru hull fitting that go all the way thru the hull but are not holding anything on what were these orginally for.
  16. J

    bilge pump

    I have a bilge pump with an on off switch on my 98 bass tracker. I have to replace the pump and would like to upgrade to an automatic pump. How would I wire it so that it will still be automatice with just the on off switch and not a three way switch.
  17. J

    12 volt trolling motor

    I have a 12 volts trolling motor and want to connect it to 2 12volt batteries for longer run time. Do i just connect pos to pos and neg to neg and then connect the trolling motor to the pos and neg of one battery. My electronics are connected as well will this be ok and when i charge them do i...
  18. J

    live well pump question

    I recently bought a 98 pro team 175 bass tracker. I need to reseal my thru hull connenction for the live well drain. Problem is it is located under the aerator and recirculator. But I cannot seem to remove the pump to get to the nut on the thru hull. The pump and recirculator is connceted to...
View older results
Top