Search results

  1. M

    Quick Connector (Fuel) Question

    I'm thinking of connecting things as noted in this sketch- Does the use of quick connectors impact anything? I have a replacement squeeze bulb in my tool box in case I need to ever swap while on the water, and it comes with quick connectors on both ends, I'm thinking of adding one more on the...
  2. M

    Anti-siphon valve

    I replaced the connector at the top of the fuel tank with a quick disconnect- so I could swap in a 6 gallon tank for decarbing, etc. The one I removed appeared to be an anti-siphon valve, does the quick connector have anti-siphon functionality built in? If not, could I get an inline...
  3. M

    Good News, Bad News, Need advice...

    Did the water pump today, 2002 Johnson 90- What a PITA, you are supposed to be able to pull a pin on the shift linkage and push to disengage, but the carb is in the way, so had to get on the other side and pull it loose from there. I never would have figured it out from the book, I ended up...
  4. M

    Prop on 24' Pontoon Question

    Hello, I have a 24' 2002 SmokerCraft Infinity Fish Pontoon boat, with a 2002 90 HP Johnson 2 stoke (J90PLSN). We trashed the prop early on a few years ago, and bought a replacement, the dealer couldn't provide me the specs on the old one, so I just picked a 15 pitch (HU1315AO) and went with...
  5. M

    OMC Sealant, Moly Lube, Adhesive and Grease Equivalents ?

    I'll be pulling the lower unit to replace the water pump in a 2002 Johnson 90 motor (J90PLSNF, 60 degree V4 loop-charged) this weekend, and the Clymer book references: OMC Adhesive M Sealant OMC Moly Lube OMC Triple Guard Grease OMC Gasket Sealing Compound Is it essential to purchase exact...
  6. M

    Which Motor do I have?

    I have a 2002 Johnson 90 HP Motor, J90PLSN, Ser # 04989363 I see references to different models, like 60? V4 Eagle or 90? Crossflow V4- How do I tell which I have? Thanks ! Pritch-
  7. M

    What to Order for Impeller Replacement

    Just figured out why my motor quit running- nothing to do with carbs, but a bad ignition switch, at least for the primer function- Pulled it and put an ohm-meter on it, no continuity between the B and C points when pushing the key in, no matter what position the key was in. (Wonderful info on...
  8. M

    How many carbs?

    I have a 2002 90 Johnson, J90PLSN, looking at http://www.crowleymarine.com/brp_parts/diagrams/37434.cfm it looks like 2 carbs, is that correct? I need to buy a rebuild kit for each carb, is that also correct? Thanks- Pritch-
Top