Search results

  1. C

    how much oil?

    how much oil does lower unit hold on 98 115 spl ?
  2. C

    leaking oil

    98 115 cross flow 90 deg v-4 leaking oil out of 1/16" size hole just to the front of the water intake in the gearcase. is this an easy fix or do i have to pull the complete gearcase apart?
  3. C

    maybe prop question

    allright guys i have 18' pro sport flats boat with 115 johnny with 13 3/8 x 19 pitch prop. my problem is my prop starts to slip when i go around corners and when i try to trim up even just a little. i put a pic on here to see if someone can help. dont mind the cavitation plate, i put in on...
  4. C

    overcharging??????

    98 115 spl had a prob. with charging did all the tests and needed a rectifier, replaced it but only had 2 yellow wire and 1 red on the new one hooked it up and now i am charging 16 volt at wot. is this to much?
  5. C

    where do i go

    hey guys where would i look for typical boat setup, i am having problem souds like my motor is cavitating when i trim it up to far.
  6. C

    trim gauge question

    hey guys i have 98 115 spl i just installed, i hooked up the trim gauge(part of a cluster set by beede) i trim up gauge goes down, i trim down gauge goes up tried switching wires at the trim sensor, no good. anyone no how to solve this problem, much thanks
  7. C

    115 temp sensor

    hey guys just wandering if it is possible to hook up a temp gauge to my 98 115 spl or if i can just have a warning light?
  8. C

    trim question

    i have just installed a 98 115 johnson spl,i hooked up the trim wire to the gauge but when i trim up the gauge goes down and vise-versa anyone else seen this?
  9. C

    98 115 spl cooling ?

    i have installed 98 115 spl, started it up today and is peeing good but seems like the heads are getting to warm, so i unhooked hose from thermostat to head and no water when i restarted. is this normal or do i need to do some digging.
  10. C

    oops

    hey guys just installed 98 115 johnson the problem is that i broke the little round plastic cylinder shaped piece on the control box side of the cable,is there a fix for this other than buying new cable?
  11. C

    need tach help

    hey guys i have a 97 115 mariner on my boat and am going to put a 98 115 johnson on it i have a seloc manual but can not figure out whether or not my beede gauges will work with this motor. any help please.
  12. C

    bombardier control box

    not sure where to post but here it is, i have a bombardier control box for my johnson ob but it is missing a small bracket that holds the throttle cable in. does anyone know where to find parts for this box?
  13. C

    wiring diagram 1998 115 johnson

    can anyone tell me where i can find a wiring diagram for 98 115 johnson?
  14. C

    where can i find year

    i have a 115 johnson with the model # (j115tbi ecm) or (j115tbl ecm) not sure because sticker is smudged does anyone know what year it is or where i can find out?
  15. C

    115 mariner surging at high rpm

    hey guys my 97 115 mariner is still surging at high rpm. i have cleaned all carbs, new plugs,changed fuel filter, and all new gas. anyone have any other sugestions? thanks in advance.
  16. C

    plug wires

    97 115 mariner bogging at high rpm , so i checked plug wires tonight after dark per members suggestion and looks bad. can i change just the wire or do i have to replace coils?
  17. C

    what to sell

    i bought a 99 or 2000 115 johnson from a friend who repowered with a 150. then bought a boat with a 97 115 mariner allready on it . my question is should i leave the mariner on it or should i trade them out? both run perfectly any help
  18. C

    97 115 mariner

    hey guys have another question, i have a 97 115 mariner on an 18 ft pro sport flats boat about 1100 pounds running 40 mph (gps) turning 5000 rpm. 1st-- can anyone tell me from this info what pitch is my prop? 2nd---can anyone tell me what is the max rpm for this motor?
  19. C

    97 mariner surging

    hey guys new to this forum but i have a 97 mariner 115 runs perfect at idle and low rpm but when it gets around 4000 rpms it starts surging. i have replaced the plugs and have good gas in it. anyone have any ideas?
Top