Search results

  1. hall832

    2003 Yamaha VX200TLRB VMAX. can run at 3600 rpms fine, try to get 4000 rpms dies.

    It seems like its losing fuel pressure. Had it at the boat ramp last night. it can run at 3000, 3600 rpms no problem. but as soon as i try to get 4500 rpms it stumbles once or twice and dies. checked last night still have voltage to ECM. still have voltage and a good ground to VST. After it...
  2. hall832

    1994 johnson 50 J50PLEEA wont idle. I am ready to blow this motor up

    I am ready to blow this motor up. I have checked everything except reed valves and ripping into the block. carbs gone through by me(with kits) Check comp good, fuel delivery good. fuel primer good. it will only idle for a couple seconds. then it wont restart. once plugs dry out it will fire up...
  3. hall832

    Indmar 5.7 310 HP, What is the best carb to run on the set up.

    Running twin Indmar 350's with timing at 10 @ 1000 rpm's and -32 advanced. the Holley's that came with the new motors don't seem to be a good fit. has anyone else changed out the carbs and if so to what.
  4. hall832

    Indmar 5.7 carb timing procedure. ? Base timing?

    I have read Timing procedure for the 5.7 Indmar 10 @ 1000 and 30 @ 3000 but do you have to use a shunt tool on a a carbed motor. sorry no serial numbers
  5. hall832

    2006 Optimax 90 hp ecm failure, send ecm out for reflashing.

    Send out the ecm to Simmons motor sports to flash the ecm. Any of you ever have experience with this.
  6. hall832

    2004 Mercruiser 6.2 Bravo 3 Still over heating

    Overheat alarm coming on. Put on a new impeller.Overheat still. I was getting no water to the raw water pump. Impeller was shredded. I checked the flow to the raw water pump nothing. I tried to back flush it and nothing. I then replaced the impeller, rerouted the water pick up from the bravo...
  7. hall832

    2006 6.2 Mercruiser. Bravo three. ate impeller. no water to the raw water pump.

    I am stumped. Pulled raw water pump today after overheat. The impeller was dust. I checked everything I could. The raw water pump is not getting any water. There is blockage between the pick up in the lower and the hose to the raw water pump. Does any one have any idea what the heck.
  8. hall832

    mercury v200 no fire on two cylinders.

    Not sure what year the motor is. I have checked comp. All within 5 lbs of each other. Coils are good. I don't have fire to the two middle cylinders.
  9. hall832

    Need timing procedure for Mercruiser 454

    Need timing procedure for Mercruiser 454, dropping a whole new power plant in a 1989 Formula 292. dropping in the distributor and its been a while since i have done this. have all the tools i need. any help greatly appreciated.
  10. hall832

    Need a way to cross over Jabsco to johnson part numbers

    Need a way to cross over Jabsco to johnson part numbers. I have been looking online for a couple days, i can not find a crossover chart.
  11. hall832

    2002 Mercury 40hp 2 Cyl 2 stroke. running ruff at idle

    2002 Mercury 40hp 2 Cyl 2 stroke. running ruff at idle. Idles good for a few seconds and then it coughs. I have cleaned the carb. Idle and high speed are clear. I know i have a fuel issue. What else can cause this idle issue.
  12. hall832

    2001 johnson 2 stroke fuel pump, diagram of inside with diaphragm and springs

    2001 johnson 2 stroke fuel pump, i need a true diagram to see how it is assembled. i have in pieces. any help a diagram of inside with diaphragm and spring
  13. hall832

    2004 Mercury 225 four-stroke EFI no power to Low Pressure fuel pump. Why please help

    2004 Mercury 225 four-stroke EFI no power to Low Pressure fuel pump. Why? 1. I checked the High Pressure Fuel Pump, its coming on with key. 2. I ran 12 volts to the low pressure fuel pump it works. 3. I am getting spark 4. It appears both pumps run off the same relay. but i have no voltage...
  14. hall832

    Help 90 hp Evinrude running hot, new impeller good water flow. not sure poppet vale?

    90hp Evinrude Model # E90ELEUC running hot, new impeller good water flow. not sure if poppet vale? I pulled thermostats and ran with covers off at idle there is hardly any flow. at higher rpms i have great flow. i think i have a poppet valve stuck open. I just cant find it on this motor. Does...
  15. hall832

    Honda 200 2005 Alarms and no guages

    afternoon I have a Honda 200 2005, Not sure if the gauges are related to the alarms. The alarms just beeps as soon as the motor starts. checked all the fuses. Looks like good water flow. I think if it was oil pressure it would be a solid alarm. Not sure what to check. There are no Honda people...
  16. hall832

    1998 Optimax wont start. no spark and plugs are dry. please help

    1998 Optimax 225 xl won't start. I have checked the following: 1. Fuel pump comes on with key. 2. Batteries good. Voltage 3. When I put 12 volts to the injectors the are clicking. 4. Lanyard is operating correctly. 5. Ecm is sending signal to fuel pump 6. Have pressure at fuel rail. My father...
  17. hall832

    2002 Volvo 8.1 gi, overheating.everything has been swaped with new.

    Hello I am working on a Volvo 8.1 gi closed cooling system. It will get up to 200+/- degrees. The owner had a new circ pump, thermostat, raw water impeller,manifold and risers and still over heating. Flush all system, heat exchanger has good flow. Manifold and risers stay cool while closed...
  18. hall832

    2000 Mercury 200 Optimax acts like its losing fuel pressure at top end.

    2000 Mercury 200 Optimax acts like its losing fuel pressure at top end. Checked tank and fuel ball. I can idle out fine and get on a plane. Then after 5-6 minutes it starts cutting out like its not getting enough fuel. I am going to check pump in the vst. Any ideas. Thanks in advance.
  19. hall832

    1986 Johnson 150 painted gray? why?

    Bought a Johnson 150 1986. The whole thing is painted gray. Under the flywheel, carbs, the whole freaking motor. The guy said it was from up north. Everyone paints the motors gray to prevent corrosion. I have never heard of that. Any thoughts.
  20. hall832

    2000 Mercury 200 Optimax wont shut off at keyswitch

    2000 Mercury 200 Optimax wont shut off at keyswitch. Just replaced ECU. I couldn't get spark unless I put 12 volts to the external fuel pump. Now its running perfect. I just can't turn it off. I did some work on dash. Is there a kill wire on the key switch? Thanks for any help.
Top