Search results

  1. L

    Converting 2 pipe to 1 pipe fuel line

    Hi Decided to convert my 18 hp evinrude 1959 model to a 1 line system due to convenience. I have en route a pulse pump and I will drill and tap into the top side plate and fit a threaded barb for the pulse line. My question is ? What do I do with the original pressure line which connected to the...
  2. L

    1959 evinrude golden jubilee 18hp help please

    decided to buy another restoration engine as i had a spare one in the garage for parts if needed. compression is 110 psi on each cylinder and spark is good but not checked if jumping gap etc. basically this engine was cheap as the gearbox was in bits so i replaced it with the lower section from...
  3. L

    Honda b7.5 good news and bad news

    Manage to get a secondhand set of points / condenser for it and fitted this weekend. I broke the fibre part of the points as I was unsure how to attach belt and align the timing marks etc. It basically locked up when I was hand timing the engine so I stripped it down again and noticed the...
  4. L

    Honda b7.5 hp no spark

    Right gentlemen Checked ignition coil and I get readings from the live to an earth point Also readings when I connect between both ht leads Checked the primary coil inside the flywheel which also gives me readings I will post readings if anyone wants them The points have been re set but were...
  5. L

    fisherman 6hp........cannot win lol

    starts up first time and runs great but due to parts missing in the tiller it will not idle due to creeping past etc found a shop here in the uk who supplied the spring and friction block which i lubed the tiller and installed. its now idling when i align the throttle with the start sign on the...
  6. L

    Flywheel removal

    Will remove the flywheel to check coils and magnets on my b7.5 for piece of mine. I will make up a metal plate to hold the f/w still whilst I undo the nut but what do others do ?
  7. L

    old honda b7.5 no spark

    right.....first four stroke to tinker on just picked up and previous owner said it started but wouldnt run long etc quick look at it and they is no spark at the plugs this is an early model with no oil light but a stop push switch in its place am i missing something simple as a neutral switch...
  8. L

    Evinrude 6hp fisherman parts please

    Just restored to working order and it starts first pull and runs perfect but it as parts missing from the tiller . Unfortunately previous owners must have salvage the bits to fix other engines etc I require the spring and the plastic block etc.,. Basically it idles but the twist grip tends to...
  9. L

    6 hp throttle parts

    My 1967 6 hp as a very loose throttle and if you take your hand off it will go past the position where it should idle and then die. Removed the handle and they is no spring, friction collar nothing etc Are these cheap to buy and ship to the uk.? Motor as no stat in which I have ordered and the...
  10. L

    evinrude 6hp pee mod

    just got a plastic 90 degree elbow here but not sure if its too big threaded part is 12mm and the barbed outlet will take a 8mm internal diameter pipe....will this do or is it better to go smaller
  11. L

    6hp fisherman tiller

    i think someone as removed and replaced the tiller on this motor and got it out of sync so to speak as when its in the shift position the cam follower is way off from the cam roller. i have to start it in fast position and really twist it to speed things up. if i remove the tiller is they a...
  12. L

    Link and sync evinrude 6hp 6702s model

    Bought as a non runner but running now....stripped carb and rebuilt and will remove flywheel to sort the stator wobble....it's ok when engine running but up and down movement when flywheel removed ( think previous owners put the aluminium plate wrong way round) Biggest problem is the throttle...
  13. L

    Gearbox oil

    When changing old oil which is just mucky is it best to just use fresh oil then change that a week later etc or do any of you use a flushing oil etc
  14. L

    Evinrude 6hp 1967 vintage issues

    Just picked this up as a non runner ...compression is 85/100 but could be higher now as its a runner Only issue I have is the twist grip doesn't return to slow but only shift . It looks like its not been put on properly as when you lift up the arm to show the brass cogs the gaps between the...
  15. L

    Evinrude 4 hp gearbox oil milky

    Restored to working condition and noticed oil was milky so replaced the o ring and the 2 seals which fit over the shafts....filled up with oil and tested in water bucket and water is still getting in.....any ideas?
  16. L

    How much pressure

    Bought a fancy bravo bst 12 hp pump and want to know how much air to put in my speedyak 60 dinghy. Many thanks
  17. L

    Evinrude 4hp prop shear pin

    1974 direct drive model with 3 blade plastic prop The shear pin is only 12 mm long It fits ok in prop and turns ok but it only protrudes around 1 mm either side of shaft I ordered 2 pins from the correct part number for my engine and those are too long Is my prop standard
  18. L

    Evinrude 4 prop seal

    Replacing all 3 seals in the gearbox on the evinrude 4 direct drive 1974 vintage It's the one on the prop I need advice on as I not sure how I can get it out without resorting to caveman tactics Any ideas
  19. L

    4hp parts required

    Looking for some parts for my 44b36r 4 hp motor. Basically it's the seals in the gearbox I want to replace but I live in the uk so if anyone ships overseas and do PayPal that will be great
  20. L

    Evinrude 18 hp 1957 not starting

    Hi Second evinrude I bought as non running but other one runs great This is a 1957 18hp electric start version ( no serial numbers or model anywhere etc) Reliably informed on above by a marine engineer who's seen it and taken part numbers for approx year etc Compression is 120 psi on both...
Top