Search results

  1. L

    94 Johnson 200 Ocean Runner won't idle when timing set 4 ATDC per manual

    I can get it idle if I set the timing to about 4 BTDC. It will idle for a few seconds on the hose but not in the water.The engine has NOT been run in the water in about 3.5 years. I just ordered the carb rebuild kits. Any ideas out there of other things I need to check.
  2. L

    Only have spark on 3 cyl. 2-top right and 1-top left

    :confused: 94 200 Johnson Ocean Runner Cleaned the Flywheel, Stator, all connections "to and from power pack"
  3. L

    1 7/16" Flywheel Socket (94' 200 Ocean Runner)

    The manual says the flywheel nut is 1 7/16" however; the socket I picked up over the weekend won't fit into the flywheel offset to get to the nut. Does anyone know if this is a special socket or maybe the one I picked up has thicker walls then normal, it is a 3/4" drive socket. Opinions welcomed..
  4. L

    25hp Mariner shears flywheel keys at idle

    I can start the motor and it will run great until you go to idle it down to put it in gear at that point it will shear the flywheel Key. There is no back fire or spitting just shears the key. Any Ideas??? :confused:
  5. L

    Marine Paint Sugestions

    I've just about completed my rebuild of my 94 Proline 210cc. It's getting close to painting time and I was wondering if anyone had heard of"Mega Gloss 1 Part Marine Topside Polyurethane Enamel". I want to do the paint job right but, not sure if it's worth the $500.00 for aw grip or if I can get...
  6. L

    E3 spark plugs in outboard?

    OK, I have a friend that just replaced his plugs in his 93 Ocean Runner 200 with the new E3 spark plugs. I went out with him for a ride, We both have the same boat & engine except mine is a 1994. (currently being rehabbed):) I swear the motor sound better then ever & gained about 250 rpm...
  7. L

    94 Proline 210cc engine rigging on bracket

    OK, here is the scoop. I have refurbished a 1994 Proline 210cc from the hull up. I enclosed the transom and have mounted a Stainless Maine engine bracket with a 28" setback. I need some advice on rigging the engine. The engine is a 94 200HP Johnson Ocean Runner in great shape. As you may know...
  8. L

    94 Proline 210cc engine rigging on bracket

    OK, here is the scoop. I have refurbished a 1994 Proline 210cc from the hull up. I enclosed the transom and have mounted a Stainless Maine engine bracket with a 28" setback. I need some advice on rigging the engine. The engine is a 94 200HP Johnson Ocean Runner in great shape. As you may...
  9. L

    Transom Engine Bracket Mounting

    I'm just about done with the rebuild of my 94 21' ProLine. I have replaced and closed in the transom to mount the used bracket I bought. Does anyone know the formula for how much to raise the engine for each foot of setback. My bracket's setback is 30".
  10. L

    Daytona Plastics Hatch - Latch Parts

    Good Afternoon, Does anyone know where I can purchase the twist lock and fold down latches that would fit hatches made by Daytona Plastics. I'm guessing they have gone out of business because I can't find a listing for them on the internet.
  11. L

    Lifting my 1994 Johnson 200

    I need so help. I can't seem to find a place to lift the motor by. Is there a special bracket that is used when pulling the motor off? Thanks for your help in advance.:confused:
  12. L

    94 21' Proline with outboard Bracket

    Good morning everyone I have a question for you. I'm redoing a 94 Proline 21' and I'm thinking of installing an engine bracket. My question is, How much engine bounce will the bracket cause when trailering it down the road and is there a way to eliminate the bounce.
  13. L

    1994 21' Proline 210cc (Deck issues)

    Hello, Let me say that I'm a long time reader of this post. I need some help the deck is rotten in some areas and just sponge in others. I have been thinking of replacing the entire deck rather then piece it together. I already know that the transom is solid and it seems that the stringers are...
  14. L

    94 200 Ocean runner (5000 RPM's) Rookie

    Here is my situation, I just bought the boat and motor. 1994 21' ProLine cc with a 94 200 Ocean Runner. After replacing the regulator she is charging and runs great but, I'm only getting 500 rpm's at WOT. The prop is ss 14x19. At WOT she runs about 42. Here is the stickler when I use my...
  15. L

    Need Help! New Deck 1994 Proline 210

    I have several soft spots and 1 really bad spot on the deck of my new/old 1994 21' Pro-Line cc 25th anniversary edition. I just got the boat about 3 weeks ago and knew from the get go that there was some issues with the deck. I have never replaced a deck in a boat that has a liner. I have been...
  16. L

    No spark after replacing the voltage regulator

    I have a 94 Johnson 200 Ocean Runner that was running OK but, was not charging. I replaced the Voltage regulator and now I have no spark at all. I have double checked all the wires and cleaned them all. I'm open for any ideas you may have. Thanks in advance...:confused:
Top