Search results

  1. B

    93 60HP Johnson wont start

    Hi guys! After several years of trouble free boating my motor will not start now. It is currently sitting in a slip so I can't pull it off the water without it starting. Was going to do a impeller change but that will have to wait now. Boat was running good over the spring and I started...
  2. B

    1986 Force 35 Fuel line deliver...3/8" barb

    Re: 1986 Force 35 Fuel line deliver...3/8" barb Hi and welcome! :) You have two different type connections there. They will not work together. That should give you some type of idea of what you need. Hope that helps.
  3. B

    93 Johnson 60HP cold start issue

    Hi guys I have a 93 Johnson 60HP pushing my pontoon. I am a little confussed on the choke operation. The choke is the push type on the ignition switch. When I turn the key to run and push in I hear a click from the solenoid on the motor. I do not see anything moving though. Should I see...
  4. B

    73 Chrysler 20 HP stuck in gear

    Hi guys, looks like I am working on my sons 73 Chrysler 20 HP this weekend. Anyway its stuck in gear so I removed the lower unit and can not move the shift rod up or down. Any solution for this issue short of getting the lower unit rebuilt? I just love it when he buys something and says it runs...
  5. B

    Gas cap with gauge replacement

    I have a 93 Sun Tracker Pontoon and it has a 20 gallon tank (I think), anyway the gas cap has a gauge in it and it fell apart. I need to get a new one but it seems to be a bit of a challange. I was able to retreive the medal part but cant fish out the float. Anyone know where I can get a...
  6. B

    93 21' Pontoon over proped

    Hi guys finely switch boats and picked up a 1993 21' Pontoon with a 1993 60 Johnson, it has been converted to pre-mix. Have a questions thought you could help me with. At WOT the motor is only running at 4000 RPMs(around 15mph) I was reading and it appears this motor should be running 5000...
  7. B

    My new Johnson 60

    Hi guys finely switch boats and picked up a 1993 21' Pontoon with a 1993 60 Johnson, it has been converted to pre-mix. Have a couple of questions thought you could help me with. At WOT the motor is only running at 4000 RPMs(around 15mph) I was reading and it appears this motor should be...
  8. B

    what starter number do I need

    I have a 1975 Mercury 200 (20 hp) motor. SN is 4286934. It did not come with a starter, I got it running and now I want to install a starter. Any idea what model of starter I need?
  9. B

    115 stumbles on takeoff

    Hi guys have a question about my 77 inline 6 tower of power, Serial number is 4701195. I rebuilt the carbs and the boat runs really well now. Only problem I have is when I shift into gear the motor stumbles and then dies. It will do this unless I play with the fuel enhancer to get it going...
  10. B

    Any way to tell if lower unit is good....

    Any way to tell if lower unit is good if it is uninstalled? I have a Mercury 150 spare motor and have removed the lower unit. I was told it was good but dont want to take mine apart and replace it if it is no good. BTW mine has no reverse. Older Mercurys 77 models. Power of tower type...
  11. B

    115, Spark and Fuel...no start ?

    Hi Guys I am back again.......:confused: A little confussed here, looking for some assistance. I did some searching but most of what I found was no spark issues. I have a 77 Mercury 115 inline 6. Compression is fine, 119/119/120/119/120/121 Motor was running fine the other day and then on...
  12. B

    1150 tilt trim ram ?

    Hi all I have a 1977 1150 with a tilt trim. One of the cylinders is leaking, is there a rebuild kit for these rams? If so where can I purchase one. This is the 2 line ram.
  13. B

    115 carb questions

    I have a 1977 1150 Mercury, This engine has never idled correctly and has alway given me issues. By that I mean hard to start, can not idle without the fuel enhancer up at least 3/4 the way. It must be up that far just to put it in gear without it dying. Anyway, I attempted to readjust the...
  14. B

    Mid 80s 1150 electrical choke

    Hi guys I have yet another question about my 1150 inline 6 cylinder. Its a mid 80s model. The electrical choke used to work but then I noticed it would take forever to start and started checking things out and noticed the electrial choke stopped working. When I press the choke button on the...
  15. B

    No juice to start the motor ...sometimes?

    I got it Mercury 1150 80ish model
  16. B

    115 Mercury starts but takes along time in water?

    Hi guys looking for a little help here. I have a Mercury 1150 and I took it to the boat mechanic and he checked it out. He said it was fine but running a little lean, he adjusted it and it now works somewhat. When the ear muffs are on it fires right up, well after first getting it started...
  17. B

    50 HP Johnson questios // new guy

    Hi guys, I have an old 72 50hp Johnson and the lower unit is going out. It has an electric shift. I took it to the shop but he said he would not touch it, as it has an electric shift. The symptons are it will come out of gear under load. As in saying it will idle ok and perform ok when going...
Top