Search results

  1. E

    7.4 not running right

    I have a 1990 sea ray sundancer in which over the past 7-8 years I’ve completely rebuilt…new interior, new motor, bravo 3 drive…yesterday I finally got to splash her for the first time inn8 years or so. I put $80 in fresh gas in her, it was empty before, it started fine with 2 pumps of the...
  2. E

    Window ?

    I didn’t put it here, I actually started a different topic, the admins must have moved it here….when I don’t get a response I start a new thread.
  3. E

    Window ?

    Anyone ever take a window out of a 1990 sea ray sundancer?
  4. E

    Bravo 3

    So what’s the difference in the drives if you have twins? Doesn’t one motor turn opposite?
  5. E

    Bravo 3

    So with me standing on top of the motor looking at the back of it it’s rotating ccw. So I should be good then? Sorry for so many stupid questions
  6. E

    Bravo 3

    OK, I just went out and started the motor and while standing on top of the motor it sure as hell seems like it is rotating counterclockwise
  7. E

    Bravo 3

    Ya know I just thought about something. Is it possible the motor I put in it rotates the opposite direction from my original motor preventing the drive from going into gear?
  8. E

    Bravo 3

    So if I’m standing opposite the prop shaft at tge shaft that goes into the engine, I can turn the shaft clockwise then shift it that way?
  9. E

    Bravo 3

    When you say driveshaft, are you referring to the shaft the propeller is mounter to or the shaft that goes into the engine?
  10. E

    Bravo 3

    So am I overthinking this thinking I have an issue? Shouldn't there be a way to shift it into gears off the boat?
  11. E

    Bravo 3

    OK here’s where I am at with this, I just got done reassembling the top half and I am right back to square one, when I take this Allen bolt out of this fork the shift lever seems to move freely, however when I reinstall that bolt in the fork it still gets hung up and will not seem to shift. I...
  12. E

    Winterization

    Ok, how many plugs are there on each side, 1 or 2? Also why do I need to remove the power steering hose and where is this k hose located at?
  13. E

    Winterization

    I know I’m gonna get some flack about this but here goes. I got my 1990 sea ray sundancer back up and running after a 5 year hibernation… I am at the point of winterization, it’s a 7.4 big block motor, I removed the bravo 3 drive. Where are all the points I need to drain the water from the...
  14. E

    Bravo 3

    Gotcha, Thanks for the part numbers, I will attempt to reassemble it this weekend and get back with you guys, thanks again
  15. E

    Bravo 3

    OK I think I’m gonna try to reassemble it without that shift linkage arm and see how it shifts that way. But in the meantime does somebody have a part number for these O-rings for the top and front cover? Also am I correct to assume since this has the newer clutch on it that it has been replaced...
  16. E

    Bravo 3

    Timing marks? Are you referring to the positive and negative marks
  17. E

    Bravo 3

    Well I’m not sure if it’s reverse or forward but when I have the drive off, the arm that cones out of the drive, that’s the gear it’s hard to come out of.
  18. E

    Bravo 3

    So what do you think that I should do, replace my shift arm or what? I plan on getting a new shift cable
  19. E

    Bravo 3

    So with mine having that groove in it, am I correct to assume that the clutch has been replaced but those springs haven’t?
  20. E

    Bravo 3

Top