Search results

  1. S

    87 Searay Alpha One Shift & Start problems

    I don't know, I always thought the interrupter had nothing to do with starting. Last year I replaced the distributor and the module on my Alpha one. Drove aprox 3 miles and it died. would not start for a couple days. I read on this sight that the switch can make it hard/impossible to...
  2. S

    hei ignition retrofit

    Summit Racing recommended Sierra Marine Thunderbolt 4 HEI Distributors 18-5471 WITH HAS A INTERRUPTOR WIRE that will connect to a micro switch "designed for Mercruiser V6" 358.99 bucks hope this switch cleaning was all that was needed. ? if still will need module in the future....
  3. S

    hei ignition retrofit

    Well Dab Nabit. took a quart of electronic cleaning fluid and sprayed the grease off of the microswitch. Then a sharp thin knife and worked the plunger in and out a dozen times. Turned the key expecting NOTHING and Varoom started immediately. Well that is amazing, happy but confusing...
  4. S

    hei ignition retrofit

    Hello everyone Last year I replaced the coil, distributor and thunderbolt 4 module. Mercruiser V6 alpha one. Module was new OLD stock. This year put boat in the water and ran great x 3 miles and again Quit. No spark none at all. I am assuming the Thunderbolt 4 unit went bad...
  5. S

    Alpa one Mercury MerCruiser

    4.3L alpa 1 Mercury Mercruiser distributor has quit, the electric module is bad. Trying to get this old?good boat up and running Per my mechanic you have a hard time replacing with a new distributor because they do not have the "cut out" to be able to shift. These modules are old...
  6. S

    Mercruiser Alpha One Series One, no Reverse

    Well tightened up cable and it now works great. Boy that was easy. Thanks for the help.
  7. S

    Mercruiser Alpha One Series One, no Reverse

    Here we go I will let you know :)
  8. S

    Mercruiser Alpha One Series One, no Reverse

    Alldodge Thank You, that's what I was thinking. Question if I try to adjust which cable, which way? Looks like bottom RAM and that I would need to screw the cable OUT towards the tramson ? 4 turns. But do the turns at the brass barrell or at the lock nut at the cable. Cable sure...
  9. S

    Mercruiser Alpha One Series One, no Reverse

    Additionally, the cables from the throttle to the top of the engine appear to work correctly. cable from the top of the lower unit also seems to move correctly. But, does not go into reverse. ? disconnected in the lower unit.
  10. S

    Mercruiser Alpha One Series One, no Reverse

    Grandkids coming and the boat is down. The interior guy just replaced vinyl and wood on both side panels. The boat no longer goes into reverse. Shifts fine just no backwards propulsion. Forward is perfect but seems to still creep forward in neutral. Shifts easily, Just ZERO reverse...
  11. S

    water temp

    Thanks, how hot/temp should the 4.3 get while idling?
  12. S

    water temp

    My water gauge quit registering temps. When I ground out the temp gauge wire at the sending unit the gauge tops out. I am told that means the sending unit is still bad. I replaced the sending unit with one "supposedly the same" from auto zone.
  13. S

    water temp gauge

    My water gauge quit registering temps. When I ground out the temp gauge wire at the sending unit the gauge tops out. I am told that means the sending unit is still bad. I replaced the sending unit with one "supposedly the same" from auto zone.
  14. S

    Help no forward or reverse alpha one, gen.1 mercruiser, 4.3L

    14 months ago I had the 4.3L engine pulled for a blown head gasket. (Done by good shop) Engine was repaired and the boat ran great all last summer. EXCEPT throttle handle seemed too tight against the side) Extremely cold winter last year and my winterizing "not so good" I cracked two exhaust...
  15. S

    Help no forward or reverse alpha one, gen.1 mercruiser, 4.3L

    14 months ago I had the 4.3L engine pulled for a blown head gasket. (Done by good shop) Engine was repaired and the boat ran great all last summer. EXCEPT throttle handle seemed too tight against the side) Extremely cold winter last year and my winterizing "not so good" I cracked two exhaust...
  16. S

    Repower options for 4.3l 1990

    I believe I cracked the head on my 1990 Smokercraft Deck Boat. It's a great old boat. My mechanic has suggested I purchase a crate long block for a 1990 S10 (biggest standard cam). Swap the Mercury parts and call it a day. I wanted to change to a 4 barrel and add an after market cam,. He says...
Top