Search results

  1. C

    Milky oil

    Havent had a chance to mess with it anymore due to a death in the family. But How long should it hold pressure? It holds the 15 psi for about 24 hours. Then slowly loses it probably 5 psi within a week.
  2. C

    Milky oil

    Something kinda odd seemed to happen tonight. It has held that 15psi for days maybe lost a half a psi of that. Anyways I tipped the boat up and drained all the oil to get all that milky crap outta there and went back about 2 hours later to see if i had locked the garage door and I looked at...
  3. C

    Milky oil

    Just looked up a schematic it does have a gasket on either side of the metal plate. I guess I'll replace it what's everyone's opinion gasket and do away with metal plate or go with factory setup?
  4. C

    Milky oil

    And yes it's all factory vp setup. One corner of that metal plate sticks out like s little tab and it has red paint on it. It was clearly painted red after the plate was installed
  5. C

    Milky oil

    So just do away with the metal plate and use one gasket or gasket both sides? I may order some gaskets and try this since I now see that water has been leaking from it before I pull manifold I'll order some spares too incase I end end pulling the manifold
  6. C

    Milky oil

    When you take the riser off is there supposed to be any sort gasket there? Seems like last time I had it off there was just a metal plate with only one hole. I can see where a small amount of rusty water has been leaking outside from the riser manifold seal if its leaking there I'm sure it...
  7. C

    Milky oil

    Checked the boat on my lunch break. The block has held 15psi all night long. Thank you for your suggestion scott. Is it possible to pressure test the manifold on the boat? If I could somehow block the water part off on the riser I could check that whole system.
  8. C

    Milky oil

    Update...out of curiosity and the fact I already have my test hoses already made from last time. I went ahead and started my pressure test. Block was drained of water and filled with 15psi. Will update everyone tomorrow after work to see if it lost any, if it did I will check all my...
  9. C

    Milky oil

    Hey everyone about 4 years ago I posted here about milky oil in my 2007 stingray with a volvo penta 3.0. It was under a different account I was unable to access. Yall were very helpful back then and helped me trouble shoot with pressure testing the cooling system and compression test. I...
Top